HP StoreOnce 2700 Installation And Configuration Manual page 118

# net create portset v6_vlan Port_Set_2 ports eth1 bondmode 1 vlansupport yes framesize 1500
Command Successful
# net add subnet v6_vlan subnet public_IPv6 ipaddr fcda:cd45:5ab0:862::92 prefix 64 domain mydomain.com portset
Port_Set_1 default yes gateway fcda:cd45:5ab0:862 ::0
Command Successful
# net add subnet v6_vlan subnet v6_vlan_861 ipaddr fcda:cd45:5ab0:861::65 prefix 64 gateway fcda:cd45:5ab0:861::0
domain mydomain.com portset Port_Set_2 default no vlantag 861
# net validate config v6_vlan
Command Successful
# net show config v6_vlan
----------------------
Network Name: v6_vlan
Network Description: Two subnets on different network interfaces. Static IPv6 address on interface eth0 and a
static IPv6 address with VLAN tag on interface eth1.
Write Protected: no
DNS Servers: fcda:cd45:5ab0:862::99
Port Sets: Port Set_1 Port Set_2
----------------------
Number of Networks: 2
Number of V4 VLANs configured: 0 out of possible 128
Number of V6 VLANs configured: 1 out of possible 128
----------------------
Network: public_IPv6
----------------------
IP Addresses: fcda:cd45:5ab0:862::92
Netmask/Prefix: 64
Domain Name: mydomain.com
Gateway: fcda:cd45:5ab0:862::0
Default Network: yes
VLAN tag:
Port Set: Port Set_1 with these interfaces: eth0, Framesize: 1500
Encryption Links:
Bonding Mode: Not applicable
----------------------
Network: v6_vlan_861
----------------------
IP Addresses: fcda:cd45:5ab0:861::65
Netmask/Prefix: 64
Domain Name: mydomain.com
Gateway: fcda:cd45:5ab0:861::0
Default Network: no
VLAN tag: 861
Port Set: Port Set_2 with these interfaces: eth1, Framesize: 1500
Encryption Links:
Bonding Mode: Not applicable
Command Successful
# net activate config vlan6_vlan
The network configuration v6_vlan contains a new default subnet.
As a result all network interfaces will be reset, resulting in a temporary outage of all management and data
network connections.
Do you wish to continue ?
Network activation in progress.
Use the 'net activate status' command to check for completion.
Command Successful
# net activate status
Activation started on 13/08/2014 at 14:11:55+0000 completed successfully on 13/08/2014 at 14:11:58+0000
Total running time was 00:00:02.993
Command Succeeded
# net show status all
Subnet Status Overview
Subnet HPDA3DE52E99 v6_vlan_861 status: up
Subnet HPDA3DE52E99 public_IPv6 status: up
------------------------
Node Name: HPDA3DE52E99
Default Domain Name: mydomain.com
Default Gateway: fcda:cd45:5ab0:862::0
Default Subnet: public_IPv6
DNS: fcda:cd45:5ab0:862::99
Subnet: v6_vlan_861
1 18 More networking examples
(y / n)y