Configuring Licenses; Licensing Requirements For Storeonce Hardware Products; Applying The Instant On License - HP StoreOnce 2700 Installation And Configuration Manual

5. You can check the configuration, as shown in the following example:
# time show config
NTP Server(s)
-
TimeZone
UTC
LocalTime
NOTE: If configuring time manually or via an NTP server results in time moving backward, you
will be prompted to perform a system reboot.

Configuring licenses

Licensing requirements for StoreOnce hardware products

There are two types of license:
Full license (not time limited)
Instant on or Demo (time limited to 90 days): This allows you to try out licensable functionality
before paying for a full license for any of the features described below.
The HP StoreOnce Backup system licensing requirements are:
All capacity expansion must be licensed. Each storage expansion kit contains a license that
must be loaded.
HP StoreOnce 4900 Backup: The correct number of licenses for additional storage must be
installed in the correct order. The 44TB Capacity Expansion Kit has a different license type
from the 60TB Capacity Expansion Kit. The StoreOnce Backup system requires licenses to be
installed in the following sequence: 5 x 44TB Capacity Expansion, 1 x 60TB Capacity
Expansion, 5 x 44TB Capacity Expansion.
No licensing is required for VTL or NAS emulations.
VTL and NAS replication requires a license on the target system.
StoreOnce Catalyst devices require a license for backup and for copy, so licenses must be
installed on both origin and destination systems.
Security features (Data at Rest Encryption, Data in Flight Encryption, and Secure Erase) require
a Security license.

Applying the Instant On license

NOTE: The Instant On license is sometimes called the Demo license.
The Instant On license is available for all StoreOnce Backup systems and is a single license that
enables two features, StoreOnce Catalyst and StoreOnce Replication, for a period of 90 days.
This allows customer to try some of the advanced features in StoreOnce units without having to
purchase a full licence in advance. The license must be activated as described in the next section.
NOTE: This license does not include capacity expansion nor the Security Pack.
To continue using these features, separate licenses must be purchased for StoreOnce Catalyst and
Replication and applied within the Instant-On period. If they are not, data is not lost but:
Replication: Replication Target libraries will become read only.
StoreOnce Catalyst: Catalyst jobs will fail.
60 Completing the installation
ntp.mycompany.net
: BST
: 09/19/2012 12:37:40
: 09/19/2012 13:37:40