To Write Protect Or Un-Protect A Configuration - HP StoreOnce 2700 Installation And Configuration Manual

6. Enter Subnet details, in exactly the same way as when creating a new configuration, and be
sure to add the VLAN tag ID. Click OK.
7. Save and validate the changes. If required, you can also activate the configuration at this
point.

To write protect or un-protect a configuration

Select the configuration in the Custom Network Configuration list and click Edit.
Click in the Protected checkbox to change its status and click Save.
Repeat this process to switch the status back to Un-protected.
58 Network configuration, how to use the StoreOnce GUI