Front View Of The Hp Storeonce 4700 Backup System - HP StoreOnce 2700 Installation And Configuration Manual

Front view of the HP StoreOnce 4700 Backup system

The HP StoreOnce 4700 Backup system consists of a head server unit (with two disks) and one
disk enclosure on which storage has already been expanded. It supports connection of up to seven
additional storage enclosures (Capacity Upgrade Kits); storage must be expanded when Capacity
Upgrade Kits are added to the base configuration. All storage enclosures have 12 x 2 TB disks.
Figure 29 Front view of the HP StoreOnce 4700 Backup system
1. System Health LED
2. NIC status LED
3. Power On button/LED
4. UID button
5. System Insight Display
6. Hot plug drives
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or fan failure
Off: no network connection or network not configured
Steady green: network connected
Flashing green: network activity
Steady green: Power connected, device ready to use
Flashing green: performing power on sequence
Steady amber: Device switched off or in hibernation with power connected
Steady blue: identifies the unit
Off: No power connected
Steady blue identifies the StoreOnce Backup system in the rack.
Flashing blue: remote management or firmware upgrade in progress
The HP systems Insight Display LEDs represent the system board layout and may
be useful for troubleshooting.
These drives contain the operating system and filesystem. They are not used for
data storage.
Front view of the HP StoreOnce 4700 Backup system 101