Front View Of The Hp Storeonce 2700 Backup System - HP StoreOnce 2700 Installation And Configuration Manual

Front view of the HP StoreOnce 2700 Backup system

The HP StoreOnce 2700 Backup system has 4 x 1 TB disks. It does not support connection of an
expansion shelf (Capacity Upgrade Kit).
Figure 33 Front view of the HP StoreOnce 2700 Backup system
1. UID button
2. Power On button/LED
3. System Health LED
4. NIC status LED
5. Hot plug drives
Steady blue identifies the StoreOnce Backup system in the rack.
Flashing blue: remote management or firmware upgrade in progress
Steady green: Power connected, device ready to use
Flashing green: performing power on sequence
Steady amber: Device switched off or in hibernation with power connected
Steady blue: identifies the unit
Off: No power connected
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or fan failure
Off: no network connection or network not configured
Steady green: network connected
Flashing green: network activity
Front view of the HP StoreOnce 2700 Backup system 105