To Apply A Full License - HP StoreOnce 2700 Installation And Configuration Manual

To apply an Instant On license
Use StoreOnce CLI commands as follows:
license show to show the current license status
license add demo to apply the 90–day license for all licensable features.
See the HP StoreOnce Backup system CLI Reference Guide for more information.

To apply a full license

Features that require a license include a license entitlement certificate with the hardware product.
This is either an electronic document provided at purchase, such as Replication, StoreOnce Catalyst,
Security (Data at Rest Encryption, Data in Flight Encryption, or Secure Erase), or a paper document
provided with a capacity upgrade kit. The document contains all information required to obtain a
unique License to Use (LTU) key. Obtain the key from the HP Licensing site by connecting to the
web address specified on the certificate and following the instructions. (Users without Internet
access may use the contact numbers provided with the entitlement certificate.)
You will be required to enter the product's serial number when requesting an LTU key.
The number you should use is either the System ID that can be found on the Device Configuration
page of the GUI or the Serial Number that can be found on the Status page of the GUI. The HP
licensing portal accepts the UUID with, or without, the leading "hp".
1. Obtain the unique LTU key as instructed on the License Entitlement Certificate. This is normally
from the HP Licensing website at http://www.myhplicensing.hp.com. HP recommends saving
the license to a .DAT file. The file can also be emailed to the registered license owner's email
address, or Cut and Paste to copy it to a temporary file.
NOTE:
at the top of the website page.
IMPORTANT:
will ask you to provide a serial number. The number you should use is the System ID that can
be found on the Device Configuration page.
Do not use the warranty serial number that can be found on the server or tag attached to it.
Always use the Serial Number as displayed in the HP StoreOnce Management GUI.
2. If you save the LTU as a file, sftp it into the HP StoreOnce Backup system's repository
directory.
Using Linux
sftp Admin@<IP_address>
cd repository
put <LTU>.DAT
exit sftp
Using a Windows sftp client
Ensure the File Protocol is set to SFTP, not SCP.
A Quick Start guide to using the HP Licensing website is available from the Help link
When redeeming licenses for replication and additional storage, HP Licensing
Configuring licenses 61