HP StoreOnce 2700 Installation And Configuration Manual page 47

---------------------------------------------------------------------
If you specify at least one network gateway, you must choose a
default network from either the defined DCHP OR Static subnets
as DCHP includes both IPv4 and IPv6 gateways.
The default network must have an associated gateway.
If you do not specify any network gateways, then you may not choose
a default network.
---------------------------------------------------------------------
Select a default network (The default network shall be used as the default gateway subnet) :
1 = subnet_1 - DHCP (default)
-->1
<--Default Subnet: subnet_1 - DHCP
*Step Complete* Do you want to :
1 = Go to next step: Step 3) (default)
2 = Go back to previous step: Step 1)
3 = Go back to start of present step: Step 2)
4 = Quit wizard and lose all settings
-->1
<--Navigation: Go to next step: Step 3)
Step 3) Save and apply all network settings
-------------------------------------------
----------------------
Network Name: net_wizard
Network Description: Created by wizard on: Tue Oct 7 10:42:35 2014
Write Protected: no
DNS Servers: 172.1.1.100 172.1.2.100 2001:DB8::1
Port Sets: Port Set_1 Port Set_2 Port Set_3
----------------------
Number of Networks: 4
Number of V4 VLANs configured: 1 out of possible 128
Number of V6 VLANs configured: 1 out of possible 128
----------------------
Network: subnet_1 (default)
----------------------
IP Addresses: dhcp
Netmask/Prefix: dhcp
Domain Name: dhcp
Gateway: dhcp
VLAN tag:
Port Set: Port Set_1 with these interfaces: eth0, Framesize: 1500
Encryption Links:
Bonding Mode: Not applicable
----------------------
Network: subnet_2
----------------------
IP Addresses: 10.1.1.16
Netmask/Prefix: 255.255.255.0
Domain Name: rnd.mycompany.net
Gateway: 10.1.1.1
VLAN tag: 22
Port Set: Port Set_2 with these interfaces: eth4 eth5, Framesize: 1500
Encryption Links:
Bonding Mode: 4 (Link Aggregate Control Protocol (LACP) Bonding)
----------------------
Network: subnet_3
----------------------
IP Addresses: 2001:DB8::10
Netmask/Prefix: 64
Domain Name: manuf.mycompany.net
Gateway: 2001:DB8::100
VLAN tag: 23
Port Set: Port Set_2 with these interfaces: eth4 eth5, Framesize: 1500
Encryption Links:
Bonding Mode: 4 (Link Aggregate Control Protocol (LACP) Bonding)
----------------------
Network: subnet_4
----------------------
IP Addresses: 172.1.1.16
Netmask/Prefix: 255.255.0.0
Domain Name: uk.mycompany.net
Gateway: 172.1.1.1
VLAN tag:
Port Set: Port Set_3 with these interfaces: eth2 eth3, Framesize: 1500
Encryption Links:
Bonding Mode: 6 (Active Load Balance Bonding)
The network configuration net_wizard contains a new default subnet.
As a result, the current default subnet and target default subnet network interfaces will be reset,
resulting in a temporary outage on these network connections.
Validation succeeded
Network configuration using net set wizard 47