G3 Switch 0F (Sp No. 1-105-016) - Ricoh D117 Service Manual

Bit Switches
No Function
Alarm when an error occurred
in Phase C or later
0
0: Disabled
1: Enabled
Alarm when the handset is
off-hook at the end of
1 communication
0: Disabled
1: Enabled
2-3 Not used
Sidaa manual calibration
setting
4
0: Off
1: On
5-7 Not used
D649

G3 Switch 0F (SP No. 1-105-016)

If the customer wants to hear an alarm after each
error communication, change this bit to "1".
If the customer wants to hear an alarm if the
handset is off-hook at the end of fax
communication, change this bit to "1".
Do not change the settings.
1: manually calibrates for communication with a
line, whose current change occurs such as an
optical fiber line.
Do not change the settings.
112
Comments
SM