Printer Switch 01 (Sp No. 1-103-002) - Ricoh D117 Service Manual

No Function
0-2 Not used
Maximum print width used in
the setup protocol
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Received message width
restriction in the protocol
7 signal to the sender
0: Disabled
1: Enabled
Relationship between available paper sizes and printer width used in the setup protocol
SM

Printer Switch 01 (SP No. 1-103-002)

Do not change the settings.
Setting
These bits are only effective when bit 7 of the
Not used
printer switch 01 is "1".
A3
B4
A4
Do not change the settings.
0: The machine informs the transmitting machine
of the print width depending on the paper size
available from the paper feed stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting machine
of the fixed paper width which is specified by bits
3 and 4 above.
85
Comments
Bit Switches
D649