Communication Switch 17 (Sp No. 1-104-024) - Ricoh D117 Service Manual

Available unit of resolution in which fax
messages are received
Bit 7 Bit 6
0 0
6-7
0 1
1 0
1 1
Communication Switch 15 – Not used (do not change the settings)
Communication Switch 16 – Not used (do not change the settings)

Communication Switch 17 (SP No. 1-104-024)

No Function
SEP reception
0 0: Disabled
1: Enabled
SUB reception
1 0: Disabled
1: Enabled
PWD reception
2 0: Disabled
1: Enabled
3-4 Not used
PSTN dial-in routing setting
5 0: OFF
1: ON
SM
For the best performance, do not change
Unit
the factory settings.
The setting determined by these bits is
mm
informed to the transmitting terminal in
inch
the pre-message protocol exchange (in
the DIS/NSF frames).
mm and inch
Not used
0: Polling transmission to another maker's
machine using the SEP (Selective Polling) signal
is disabled.
0: Confidential reception to another maker's
machine using the SUB (Sub-address) signal is
disabled.
0: Disables features that require PWD
(Password) signal reception.
Do not change the settings.
1: The machine sets multiple PSTN dial-in
number in the PSTN dial-in lien and transfers
received data of each PSTN dial-in number to
each address.
99
Comments
Bit Switches
D649