Ip Fax Switch 09 (Sp No. 1-111-010) - Ricoh D117 Service Manual

Bit Switches
6-7 Not used
No.
Network I/F setting for SIP
connection
0
0: IPv4
1: IPv6.
Network I/F setting for Fax
communication
1 0: Same setting as SIP server
connection
1: Automatic setting
Record-route setting
2 0: Disable
1: Enable
re-INVITE transmission delay timer
setting
Bit 4
0 0
3-4
0 1
1 0
1 1
5-7 Not used.
D649

IP Fax Switch 09 (SP No. 1-111-010)

Function
Bit 3
No delay
1 sec
2 sec
3 sec
Do not change these settings.
Comments
Selects the connection type (IPV4 or IPV6)
to connect to the SIP server.
0: The I/F setting for fax communication
follows the setting for SIP server
connection.
1: The negotiation between the SIP server
and the device decides whether IPv4 or
IPv6 is used for the I/F setting for fax
communication.
0: Disables the record-route function of the
SIP server.
1: Enables the record-route function of the
SIP server.
This changes the interval for transmit
re-INVITE after receiving the ACK message
transmitted by T.38 device.
Do not change these settings.
120 SM