To Activate/Deactivate; To Set A Desired Acc Speed - Dodge 2015 Charger SRT 392 Operating Instructions Manual

Hide thumbs Also See for 2015 Charger SRT 392:
Table of Contents

Advertisement

To Activate/Deactivate

Push and release the Adaptive Cruise Control
(ACC) ON/OFF button. The ACC menu in the
DID displays "ACC Ready."
Adaptive Cruise Control Ready
To turn the system OFF, push and release the
Adaptive Cruise Control (ACC) ON/OFF button
again. At this time, the system will turn off and
the DID will display "Adaptive Cruise Control
(ACC) Off."
98
Adaptive Cruise Control Off
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave
the system off when you are not using it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,
push the SET + button or the SET - button and
release. The DID will display the set speed.
If the system is Set when the vehicle speed is
below 19 mph (30 km/h), the Set Speed shall be
defaulted to 19 mph (30 km/h). If the system is
Set when the vehicle speed is above 19 mph
(30 km/h), the Set Speed shall be the current
speed of the vehicle.
NOTE:
ACC cannot be set if there is a stationary
vehicle in front of your vehicle in close
proximity.
Remove your foot from the accelerator pedal. If
you do not, the vehicle may continue to accel-
erate beyond the set speed. If this occurs:
• The message "DRIVER OVERRIDE" will dis-
play in the DID.
• The system will not be controlling the distance
between your vehicle and the vehicle ahead.
The vehicle speed will only be determined by
the position of the accelerator pedal.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2015 charger srt hellcat

Table of Contents