Dodge 2015 Charger SRT 392 Operating Instructions Manual page 158

appears next to the setting, showing that setting
has been selected. Press the back arrow button
on the touchscreen to return to the previous
menu.
Units
After pressing the "Units" button on the touch-
screen you may select each unit of measure
independently displayed in the Driver Informa-
tion Display (DID), and navigation system (if
equipped). The following selectable units of
measure are listed below:
• Speed
Select from: "MPH" or "km/h."
• Distance
Select from: "mi" or "km."
• Fuel Consumption
Select from: "MPG" (US), "MPG" (UK), "L/100
km" or "km/L."
• Pressure
Select from: "psi," "kPa," or "bar."
• Temperature
Select from: "°C," or "°F."
• Power
Select from: "HP" (US), "HP" (UK), and "kW."
• Torque
Select from: "lb-ft" or "Nm."
After the desired setting has been selected,
press the back arrow/Done button on the touch-
screen to return to the previous menu.
Voice
After pressing the "Voice" button on the touch-
screen the following settings will be available:
• Voice Response Length
When in this display, you may change the Voice
Response Length settings. To change the Voice
Response Length, press the "Brief" or "De-
tailed" button on the touchscreen until a check-
mark appears next to the setting, showing that
setting has been selected. Press the back arrow
button on the touchscreen to return to the
previous menu.
• Show Command List
When in this display, you may change the Show
Command List settings. To change the Show
Command List settings, press the "Always,"
"With Help" or "Never" button on the touch-
screen until a check-mark appears next to the
setting, showing that setting has been selected.
Press the back arrow button on the touchscreen
to return to the previous menu.
Clock
After pressing the "Clock" button on the touch-
screen the following settings will be available:
• Sync Time With GPS
This feature will allow you to automatically have
the radio set the time. To change the Sync Time
setting, press the "Sync time with GPS" button
on the touchscreen until a check-mark appears
next to the setting, showing that setting has
been selected. Press the back arrow button on
the touchscreen to return to the previous menu.
155