Driver Memory Seat - If Equipped - Dodge 2015 Charger SRT 392 Operating Instructions Manual

Folded Rear Seatback
When the seatback is folded to the upright
position, make sure it is latched by strongly
pulling on the top of the seatback above the
seat strap.
WARNING!
• Be certain that the seatback is securely
locked into position. If the seatback is not
securely locked into position, the seat will
not provide the proper stability for child
seats and/or passengers. An improperly
latched seat could cause serious injury.
78
WARNING! (Continued)
• The cargo area in the rear of the vehicle
(with the rear seatbacks in the locked-up
or folded down position) should not be
used as a play area by children when the
vehicle is in motion. They could be seri-
ously injured in a collision. Children should
be seated and using the proper restraint
system.
DRIVER MEMORY SEAT — IF
EQUIPPED
This feature allows the driver to store up to two
different memory profiles for easy recall through
a memory switch. Each memory profile contains
desired position settings for the driver seat, side
mirrors, adjustable pedals (if equipped), and
power tilt and telescopic steering column (if
equipped) and a set of desired radio station
presets. Your Remote Keyless Entry (RKE)
transmitter can also be programmed to recall
the same positions when the UNLOCK button is
pushed.
(Continued)
NOTE:
If your vehicle is equipped with two RKE
transmitters, one RKE transmitter can be
linked to memory position 1 and the other
transmitter can be linked to memory posi-
tion 2.
The memory seat switch is located on the
driver's door trim panel. The switch consists of
three buttons: The (S) button, which is used to
activate the memory save function and the (1)
and (2) buttons which are used to recall either of
two pre-programmed memory profiles.
Memory Seat Switches