NOTE:
The Easy Entry/Exit feature is not enabled
when the vehicle is delivered from the factory.
The Easy Entry/Exit feature is enabled (or later
disabled) through the programmable features
in
the
Uconnect®
system.
"Uconnect®
Settings/Customer
mable Features" in "Understanding Your In-
strument Panel" for further information.
TO OPEN AND CLOSE THE
HOOD
Two latches must be released to open the hood.
1. Pull the hood release lever located under the
left side of the instrument panel.
Refer
to
Program-
Hood Release Lever
2. Move to the front of the vehicle.
3. Reach under the center front edge of the
hood and push and hold the safety catch
lever to the left.
Safety Catch Lever Location
4. Lift the hood upward to the open position.
CAUTION!
To prevent possible damage, do not slam the
hood to close it. Lower the hood until it is
open approximately 6 inches (15 cm), and
then drop it. This should secure both latches.
Never drive your vehicle unless the hood is
fully closed, with both latches engaged.
81