Uconnect® Settings - Dodge 2015 Charger SRT 392 Operating Instructions Manual

Diagnostics — If Equipped
Push and release the UP or DOWN arrow
button until the diagnostic Menu is selected.
Then, the Driver is able to view engine and
emission vehicle faults.
• Push OK to have the most recent fault code
sent.
• There is a delay when the next diagnostic
code is requested during which the following
message is displayed:
• "Checking System for Diagnostic Codes."
• Driver must push the OK button again to see
the next Pcode otherwise current message
remains displayed.
• Driver exits when they cycle to another sub-
menu (up or down).
• Faults are displayed from newest to the
oldest.
• If the menu is exited before the end of codes
is reached - when the driver re-enters the list
will be restarted from the beginning.
152
• When no codes are present or the last code
is reached = (P0000) and this message is
displayed:
• "No Further or End of Diagnostic Codes."
Performance Shift Indicator (PSI) – If
Equipped
The Performance Shift Indicator (PSI) is en-
abled on vehicles with manual transmission, or
when a vehicle with automatic transmission is in
manual shift mode. The PSI provides the driver
with a visual indication within the DID display
when the driver configured gear shift point has
been reached and the driver is still accelerating.
This indication notifies the driver to change gear
corresponding to the configured RPMs in the
head unit. When the shift up indicator is shown
on the display, the PSI is advising the driver to
engage a higher gear.
The PSI indicator in the DID display remains
illuminated until the driver changes gear, or the
driving conditions return to a situation where
changing gear is not required, corresponding to
the configured RPMs in the head unit.
Uconnect® SETTINGS
The Uconnect® system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instru-
ment panel that allows you to access and
change the customer programmable features.
Uconnect® 8.4 Buttons On The Touchscreen
And Buttons On The Faceplate
1 — Uconnect® Buttons On The Touchscreen
2 — Uconnect® Buttons On The Faceplate