Table of Contents
Advertisement
Activating Adaptive Cruise Control
(ACC)
You can only engage ACC if the vehicle speed is
above 0 mph (0 km/h).
The minimum set speed for the ACC system is
19 mph (30 km/h).
When the system is turned on and in the ready
state, the instrument cluster display will read
"ACC Ready."
When the system is off, the instrument cluster
display will read "Adaptive Cruise Control (ACC)
Off."
NOTE:
You cannot engage ACC under the following
conditions:
• When you apply the brakes.
• When the parking brake is set.
• When the automatic transmission is in
PARK, REVERSE or NEUTRAL.
• When the vehicle speed is outside of the
speed range.
• When the brakes are overheated.
• When the driver door is open at low
speeds.
• When the driver seat belt is unbuckled at
low speeds.
• ESC Full-Off Mode is active.
To Activate/Deactivate
Push and release the Adaptive Cruise Control
(ACC) on/off button. The ACC menu in the
instrument cluster display will read "ACC
Ready."
Adaptive Cruise Control Ready
To turn the system off, push and release the
Adaptive Cruise Control (ACC) on/off button
again. At this time, the system will turn off and
the instrument cluster display will read "Adaptive
Cruise Control (ACC) Off."
Adaptive Cruise Control Off
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave the
system off when you are not using it.
To Set A Desired ACC Speed
When the vehicle reaches the speed desired,
push the SET (+) button or the SET (-) button
and release. The instrument cluster display will
show the set speed.
If the system is set when the vehicle speed is
below 19 mph (30 km/h), the set speed shall be
defaulted to 19 mph (30 km/h). If the system is
set when the vehicle speed is above 19 mph
(30 km/h), the set speed shall be the current
speed of the vehicle.
79
Advertisement
Chapters
Table of Contents
