Page 1 Challenger 2 0 1 5 O W N E R ’ S M A N U A L SRT 392 / SRT Hellcat I n f o r ma t i o n P r o v i d e d b y :...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 4 I n f o r ma t i o n P r o v i d e d b y :...
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION When it comes to service, remember that your authorized INTRODUCTION dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7 INTRODUCTION 5 I n f o r ma t i o n P r o v i d e d b y :...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owners Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN. I n f o r ma t i o n P r o v i d e d b y :...
Page 10 I n f o r ma t i o n P r o v i d e d b y :...
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .11 ▫ To Arm The System ....18 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Transmitter Battery Replacement ...24 OCCUPANT RESTRAINT SYSTEMS ..41 ▫ General Information ....25 ▫...
Page 13: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 The Keyless Ignition Node (KIN System) has four oper- A WORD ABOUT YOUR KEYS ating positions, three of which are labeled and will Your vehicle uses a keyless ignition system. This system illuminate when in position.
Page 14: Srt Key Fobs
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SRT Key Fobs NOTE: SRT vehicles equipped with the 6.2L Super- charged engine comes with three key fobs (two red and one black) that allow for different engine power levels. Please refer to the Drive Modes in “Uconnect Settings” section for further descriptions.
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Mechanical Latch On The Back Of The Key Fob Emergency Key Removal NOTE: You can insert the double-sided emergency key into the lock cylinders with either side up. I n f o r ma t i o n P r o v i d e d b y :...
Page 16: Ignition Or Accessory On Message
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Or Accessory On Message WARNING! Opening the driver’s door when the ignition is in ACC or • When leaving the vehicle, always remove the Key ON (engine not running), a chime will sound to remind Fob from the vehicle and lock your vehicle.
Page 17: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The system uses a Key Fob with a factory-mated Remote WARNING! (Continued) Keyless Entry (RKE) transmitter, a Keyless Ignition Node • Do not leave children or animals inside parked (KIN) and a RF receiver to prevent unauthorized vehicle vehicles in hot weather.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Vehicle Security Light turns on during normal Replacement Keys vehicle operation (vehicle running for longer than 10 NOTE: Only Key Fobs that are programmed to the seconds), it indicates that there is a fault in the electron- vehicle electronics can be used to start and operate the ics.
Page 19: Customer Key Programming
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Duplication of Key Fobs may be performed at an autho- • This device must accept any interference that may be rized dealer, this procedure consists of programming a received, including interference that may cause unde- blank Key Fob to the vehicle electronics.
Page 20: Rearming Of The System
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Vehicle Security Alarm also monitors the hood for • For vehicles not equipped with Keyless Enter-N- unauthorized entry on vehicles equipped with Remote Go™, make sure the vehicle ignition system is OFF Start.
Page 21: To Disarm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • The Vehicle Security Alarm remains armed during To Disarm The System power trunk entry. Pushing the trunk button will not The Vehicle Security Alarm can be disarmed using any of disarm the Vehicle Security Alarm. If someone enters the following methods: the vehicle through the trunk and opens any door the •...
Page 22: Security System Manual Override
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE exterior lights will flash, the horn will sound. If this This feature also turns on the approach lighting in the occurs, disarm the Vehicle Security Alarm. outside mirrors — if equipped. Refer to “Mirrors” in “Understanding The Features Of Your Vehicle”...
Page 23: Remote Keyless Entry (Rke)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from dis- tances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter.
Page 24: To Lock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the vehicle is equipped with Passive Entry, refer to Headlight Illumination On Approach “Keyless Enter-N-Go™” under “Things To Know Before This feature activates the headlights for up to 90 seconds Starting Your Vehicle” for further information. when the doors are unlocked with the RKE transmitter.
Page 25: To Unlatch The Trunk
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Sound Horn With Lock second and release. When the Panic Alarm is activated, the turn signals will flash, the horn will pulse on and off, This feature will cause the horn to chirp when the doors and the interior lights will turn on.
Page 26: Programming Additional Transmitters
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional Transmitters Programming Key Fobs or RKE transmitters may be performed at an authorized dealer. Transmitter Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate •...
Page 27: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE transmitter case, snap the two halves together, reposition and secure the screw as shown in step #2 for removal.
Page 28: Remote Starting System - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Changes or modifications not expressly approved NOTE: by the party responsible for compliance could void the • The vehicle must be equipped with an automatic user’s authority to operate the equipment. transmission to be equipped with Remote Start.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • RKE PANIC button not pushed To Enter Remote Start Mode • System not disabled from previous remote start event Push and release the REMOTE START button • Vehicle security alarm not active on the RKE transmitter twice within five sec- onds.
Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with To Exit Remote Start Mode And Drive The Vehicle the RKE transmitter. However, the ignition must be Before the end of 15 minute cycle, push and release the cycled by pushing the START/STOP button twice (or UNLOCK button on the RKE transmitter to unlock the the ignition switch must be cycled to the ON/RUN...
Page 31: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 • Low Fuel Light turns on • The hood is opened • The hazard switch is pushed • The shift lever is moved out of PARK • The brake pedal is pushed DOOR LOCKS Manual Door Locks To lock each door, push the door lock knob on each door...
Page 32: Power Door Locks
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or • For personal security and safety in the event of a in a location accessible to children, and do not collision, lock the vehicle doors before you drive as leave the ignition of a vehicle equipped with well as when you park and leave the vehicle.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 operate. This prevents you from accidentally locking the Key Fob in the vehicle. Turning off the ignition or closing the door will allow the locks to operate. If a door is open, the ignition is either cycled to ACC or RUN (engine not running), a chime will sound as a reminder.
Page 34: Keyless Enter-N-Go
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The transmission was in gear and the vehicle speed KEYLESS ENTER-N-GO™ returned to 0 mph (0 km/h). The Passive Entry system is an enhancement to the vehicle’s Remote Keyless Entry (RKE) system and a 3.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 • If the vehicle is unlocked by Passive Entry door handle and no door goes ajar within 60 seconds, the vehicle will re-lock and if equipped will arm the security alarm. To Unlock From The Driver’s Side: With a Passive Entry RKE transmitter within 5 ft (1.5 m) of the driver door handle, grab the front driver door handle to unlock the driver’s door automatically.
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors With a Passive Entry RKE transmitter within 5 ft (1.5 m) have been closed the vehicle checks the inside and of the passenger door handle, grab the front passenger outside of the vehicle for any Passive Entry RKE trans-...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Lock The Vehicle’s Doors: With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock both doors.
Page 38: Windows
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle, when pushing the door NOTE: handle button. This could unlock the door(s). • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 NOTE: • The Key Off Power Delay feature will allow the power windows to operate for up to 10 minutes after the ignition is turned OFF. This feature is cancelled when either front door is opened. The time for this feature is programmable.
Page 40: Auto-Down Feature - If Equipped
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the window part way, push the window switch WARNING! to the first detent and release it when you want the window to stop. Never leave children unattended in a vehicle, and do not let children play with power windows.
Page 41: Trunk Safety Warning
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The transmission must be in PARK before the With the ignition switch in the ON/RUN position, the button will operate. If equipped with a manual transmis- Trunk Open symbol will display in the instrument cluster sion, the vehicle speed must be under 5 mph (8 km/h) indicating that the trunk is open.
Page 42: Trunk Emergency Release
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in the trunk, children can die from suffocation or heat stroke.
Page 43: Occupant Restraint Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 2. If a child from 2 to 12 years old (not in a rear-facing OCCUPANT RESTRAINT SYSTEMS child restraint) must ride in the front passenger seat, Some of the most important safety features in your move the seat as far back as possible and use the vehicle are the restraint systems: proper child restraint.
Page 44: Seat Belt Systems
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. All occupants should always wear their lap and WARNING! shoulder belts properly. • Never place a rear-facing child restraint in front of 7. The driver and front passenger seats should be moved an air bag.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 ejection and the risk of injury caused by striking the After the sequence completes, the Seat Belt Reminder inside of the vehicle. Everyone in a motor vehicle should Light remains illuminated until the respective seat belts be belted at all times.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If BeltAlert® has been deactivated, the Seat Belt WARNING! Reminder Light will continue to illuminate while the driver’s or outboard front passenger’s (if equipped with • Relying on the air bags alone could lead to more BeltAlert®) seat belt remains unbuckled.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A shoulder belt placed behind you will not protect properly. In a sudden stop, you could move too far you from injury during a collision.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 2. The seat belt latch plate is above the back of the front 3. When the seat belt is long enough to fit, insert the latch seat, and next to your arm in the rear seat (for vehicles plate into the buckle until you hear a “click.”...
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE plate and pull on the lap belt. A snug seat belt reduces 6. To release the seat belt, push the red button on the the risk of sliding under the seat belt in a collision. buckle.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 4. Continue to slide the latch plate up until it clears the WARNING! folded webbing and the seat belt is no longer twisted. • ONLY use a Seat Belt Extender if it is physically Seat Belt Extender required in order to properly fit the original seat If a seat belt is not long enough to fit properly, even when...
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pregnant women should wear the lap part of the seat belt The pretensioners are triggered by the Occupant Re- across the thighs and as snug across the hips as possible. straint Controller (ORC). Like the air bags, the preten- Keep the seat belt low so that it does not come across the sioners are single use items.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Restraints” section of this manual. The table below If the passenger seating position is equipped with an defines the type of feature for each seating position. ALR and is being used for normal usage: Only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the ALR.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE feature. Children 12 years old and under should always 3. Allow the seat belt to retract. As the seat belt retracts, be properly restrained in a vehicle with a rear seat. you will hear a clicking sound. This indicates the seat belt is now in the Automatic Locking Mode.
Page 55: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • Steering Wheel and Column WARNING! (Continued) • Instrument Panel • Failure to replace the seat belt assembly could increase the risk of injury in collisions. • Knee Impact Bolsters • Do not use the Automatic Locking Mode to restrain •...
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE passenger’s Advanced Front Air Bag is mounted in the WARNING! instrument panel, above the glove compartment. The words SRS AIRBAG are embossed on the air bag covers. • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), which may receive information from the front impact • No objects should be placed over or near the air sensors or other system components.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE On the other hand, depending on the type and location of WARNING! (Continued) impact, Advanced Front Air Bags may deploy in crashes • Relying on the air bags alone could lead to more with little vehicle front-end damage but that produce a severe injuries in a collision.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The steering wheel hub trim cover and the upper right WARNING! side of the instrument panel separate and fold out of the way as the air bags inflate to their full size. The Advanced •...
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the out- board side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The SABICs deploy downward, covering the side win- dows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window. The SABICs inflate with enough force to injure you if you are not belted and seated properly, or if items are positioned in the area where the SABICs inflate.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to WARNING! activate in certain side impacts and certain rollover events. The Occupant Restraint Controller (“ORC”) de- • Your vehicle is equipped with left and right termines whether the deployment of the Side Air Bags in Supplemental Side Air Bag Inflatable Curtains a particular side impact or rollover event is appropriate,...
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Seat belts (and child restraints where appropriate) are WARNING! (Continued) necessary for your protection in all collisions. They also • Relying on the Side Air Bags alone could lead to help keep you in position, away from inflating Side Air more severe injuries in a collision.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE deploys the left Side Air Bags only and a right side event may be in progress and whether deployment is impact deploys the right Side Air Bags only. appropriate. A slower-developing event may deploy the seat belt pretensioners on both sides of the vehicle.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 If you do have a collision, which deploys the air bags, any continues, see your doctor. If these particles settle on or all of the following may occur: your clothing, follow the garment manufacturer’s in- structions for cleaning.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • Turn on the interior lights, which remain on as long as the battery has power or until the ignition switch is • Air bag covers may not be obvious in the interior trim, turned to the “OFF”...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 START or ON/RUN position. If the ignition switch is in diagnostics also record the nature of the malfunction. the OFF position or in the ACC position, the air bag While the air bag system is designed to be maintenance system is not on and the air bags will not inflate.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Redundant Air Bag Warning Light comes on intermittently WARNING! or remains on while driving have an authorized dealer service the vehicle immediately. For additional information Ignoring the Air Bag Warning Light in your instru- regarding the Redundant Air Bag Warning Light refer to the ment panel could mean you won’t have the air bags “Instrument Panel”...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Event Data Recorder (EDR) WARNING! (Continued) This vehicle is equipped with an event data recorder • It is dangerous to try to repair any part of the air (EDR). The main purpose of an EDR is to record, in bag system yourself.
Page 70: Child Restraints
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE These data can help provide a better understanding of Child Restraints the circumstances in which crashes and injuries occur. Everyone in your vehicle needs to be buckled up at all times, including babies and children. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs;...
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Before buying any restraint system, make sure that it has WARNING! a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install In a collision, an unrestrained child can become a it in the vehicle where you will use it.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or younger Either an Infant Carrier or a Convertible and who have not reached the height or Child Restraint, facing rearward in the weight limits of their child restraint...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Infants And Child Restraints WARNING! Safety experts recommend that children ride rear-facing • Never place a rear-facing child restraint in front of in the vehicle until they are two years old or until they an air bag.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE remain in a forward-facing child seat with a harness for WARNING! as long as possible, up to the highest weight or height allowed by the child seat. • Improper installation can lead to failure of an infant or child restraint.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 2. Do the child’s knees bend comfortably over the front WARNING! (Continued) of the vehicle seat – while they are still sitting all the • When your child restraint is not in use, secure it in way back? the vehicle with the seat belt or LATCH anchor- 3.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check seat belt fit Never allow a child to put the shoulder belt under an periodically and make sure the seat belt buckle is latched.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) seating position. These anchorages are used to install Restraint System LATCH-equipped child seats without using the vehicle’s seat belts. Some seating positions may have a top tether anchorage but no lower anchorages.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchorage Symbol 2 anchorages per • seating position Top Tether Anchorage Symbol • I n f o r ma t i o n P r o v i d e d b y :...
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Can the rear-facing child restraint touch the The child seat may touch the back of the back of the front passenger seat? front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner’s manual for more in- formation.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages There are tether strap anchorages behind each rear seating position located in the panel be- tween the rear seatback and the rear window. They are found under a plastic cover with the tether anchorage symbol on it.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 tether strap. The tether strap will have a hook at the end Always follow the directions of the child restraint to attach to the top tether anchorage and a way to tighten manufacturer when installing your child restraint.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE may need to recline the seat and/or raise the head 7. Test that the child restraint is installed tightly by restraint to get a better fit. If the rear seat can be moved pulling back and forth on the child seat at the belt forward and rearward in the vehicle, you may wish to path.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Installing Child Restraints Using The Vehicle Seat WARNING! Belt • Improper installation of a child restraint to the The seat belts in the passenger seating positions are LATCH anchorages can lead to failure of the re- equipped with a Switchable Automatic Locking Retractor straint.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using weight of the child restraint) for using the Child Restraint the seat belt to install a forward facing Tether Anchor with the seat belt to attach a...
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Can the rear-facing child restraint touch Contact between the front passenger seat the back of the front passenger seat? and the child restraint is allowed, if the child restraint manufacturer also allows contact.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. To lock the seat belt, pull down on the shoulder part of 8. If the child restraint has a top tether strap and the the seat belt until you have pulled all the seat belt seating position has a top tether anchorage, connect webbing out of the retractor.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Installing Child Restraints Using The Top Tether 3. Route the tether strap to provide the most direct path Anchorage for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, 1.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. WARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
Page 91: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 It is recommended for the operator to observe the follow- Transporting Pets ing driving behaviors during the new vehicle break-in Air Bags deploying in the front seat could harm your pet. period: An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in 0 to 100 miles (0 to 161 km):...
Page 92: Safety Tips
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 100 to 300 miles (161 to 483 km): For the first 1500 mi (2414 km): • Depress the accelerator pedal slowly and not more • Do not participate in track events, sport driving than halfway to avoid rapid acceleration in lower schools, or similar activities during the first 1500 mi gears (1st to 3rd gears).
Page 93: Exhaust Gas
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Exhaust Gas WARNING! WARNING! • Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may Exhaust gases can injure or kill. They contain carbon cause serious injury or death. monoxide (CO), which is colorless and odorless.
Page 94: Safety Checks You Should Make Inside The Vehicle
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling controls to force outside air into the vehicle.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 not lit during starting, see your authorized dealer. If the WARNING! light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer. Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- Defroster sonal injury.
Page 96: Periodic Safety Checks You Should Make Outside The Vehicle
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside WARNING! (Continued) The Vehicle • Check mounting of mats on a regular basis. Always Tires properly reinstall and secure floor mats that have been removed for cleaning. Examine tires for excessive tread wear and uneven wear •...
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid (if equipped), or brake fluid leaks are suspected, the cause should be located and corrected immediately.
Page 98 I n f o r ma t i o n P r o v i d e d b y :...
Page 99: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......103 BLIND SPOT MONITORING (BSM) — IF EQUIPPED.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Manual Front Seatback Recline ... .127 ▫ Daytime Running Lights (DRL) — If Equipped ......137 ▫...
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 ▫ Windshield Washers ....143 ▫ To Vary The Speed Setting ....151 ▫...
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Overtake Aid ......166 PARKSENSE® REAR PARK ASSIST — IF EQUIPPED .
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 ▫ Sunglasses Storage ....193 ▫ Closing Sunroof — Express....204 GARAGE DOOR OPENER —...
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE ......210 REAR WINDOW FEATURES ....212 ▫...
Page 105: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • Press the Mirror Dimmer button once to turn the MIRRORS feature On. Automatic Dimming Mirror — If Equipped • Press the Mirror Dimmer button a second time to turn A single ball joint mirror is provided in the vehicle. It is the feature Off.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If equipped, the rearview mirror contains an ASSIST and • Uconnect® Access Customer Care – In-vehicle support a 9-1-1 button. for Uconnect® Access and Uconnect® Access Via Mobile features. NOTE: The ASSIST and 9–1–1 features operate through the Uconnect®...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 3. Once a connection between the vehicle and a 9-1-1 vehicle. The vehicle’s 9-1-1 Call system will attempt to remain connected with the 9-1-1 operator until the 9-1-1 operator is made, the 9-1-1 Call system may transmit operator terminates the connection.
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • The 9-1-1 Call system is embedded into the vehi- • Modifications to any part of the 9-1-1 Call system cle’s electrical system. Do not add aftermarket could cause the air bag system to fail when you electrical equipment to the vehicle’s electrical sys- need it.
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • The Phone Screen will display the following message WARNING! (Continued) “Vehicle phone requires service. Please contact your • The Occupant Restraint Control module turns on dealer.” the Air Bag Warning Light on the instrument panel •...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The vehicle’s electrical systems are not intact. NOTE: Never place anything on or near the vehicle’s wireless and GPS antennas. You could prevent wireless and • The 9-1-1 Call system software and/or hardware are GPS signal reception, which can prevent your vehicle from damaged during a crash.
Page 111: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Outside Mirrors Outside Mirrors Folding Feature To receive maximum benefit, adjust the outside mirror(s) The mirrors are equipped with a rotational hinge. The to center on the adjacent lane of traffic and a slight mirrors have one detent (clockwise) towards the rear of overlap of the view obtained from the inside mirror.
Page 112: Power Mirrors
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power mirror controls consist of mirror select but- Power Mirrors tons and a four-way mirror control switch. To adjust a The power mirror controls are located on the driver-side mirror, press either the L (left) or R (right) to select the door trim panel.
Page 113: Vanity Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Vanity Mirrors A vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. Illuminated Vanity Mirrors An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward.
Page 114: Blind Spot Monitoring (Bsm) - If Equipped
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE desired position. To use the extender feature of the sun BLIND SPOT MONITORING (BSM) — IF EQUIPPED visor, grab the extender which is located at the rear of the The Blind Spot Monitoring (BSM) system uses two radar- visor and pull rearward.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 When the vehicle is started, the BSM warning light will momentarily illuminate in both outside rear view mirrors to let the driver know that the system is operational. Automatic Transmission Vehicles The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in PARK.
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE vehicle speed reaches approximately 6 mph (10 km/h) or The area on the rear fascia where the radar sensors are higher and will alert the driver of vehicles in these areas. located must remain free of snow, ice, and dirt/road contamination so that the BSM system can function NOTE: properly.
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking Traffic If you pass another vehicle slowly (with a relative speed of less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Overtaking/Passing Stationary Objects The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. I n f o r ma t i o n P r o v i d e d b y :...
Page 120: Rear Cross Path - If Equipped
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 122: Modes Of Operation
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE turn signal is then activated, and it corresponds to an Modes Of Operation alert present on that side of the vehicle, an audible chime Three selectable modes of operation are available in the will also be sounded.
Page 123: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Blind Spot Alert Off 2. The device must accept any interference received, including interference that may cause undesired op- When the BSM system is turned off there will be no eration of the device. visual or audible alerts from either the BSM or RCP systems.
Page 124: Power Seats
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Adjusting The Seat Up Or Down Push the switch rearward to decrease the lumbar sup- port. Pushing upward or downward on the switch will The height of the seats can be adjusted up or down. Pull raise and lower the position of the support.
Page 126: Front Heated Seats - If Equipped
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 When the HI-level setting is selected, the heater will This feature can be programmed through the Uconnect® provide a boosted heat level during the first four minutes system. Refer to “Uconnect® Settings” in “Understand- of operation.
Page 128: Front Ventilated Seats - If Equipped
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The engine must be running for the ventilated Front Ventilated Seats — If Equipped seats to operate. Located in the seat cushion and seat back are small fans that draw the air from the passenger compartment and Vehicles Equipped With Remote Start blow air through fine perforations in the seat cover to On models that are equipped with remote start, the...
Page 129: Manual Front Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 130: Passenger Seat Easy Entry
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passenger Seat Easy Entry On the passenger seat, pull forward on the lever located on the side of the seatback in order to dump the seatback and slide the seat forward. You can also temporarily remove the seat belt from the guide loop on the seat and allow the seat belt to retract out of the way.
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 The AHRs will automatically return to their normal WARNING! position following a rear impact. If the AHRs do not return to their normal position see your authorized The head restraints for all occupants must be prop- dealer immediately.
Page 132: Folding Rear Seat
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These items may interfere with the operation of the Active Head Restraint in the event of a collision and could result in serious injury or death.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Folding Rear Seat Folded Rear Seat When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap. I n f o r ma t i o n P r o v i d e d b y :...
Page 134: To Open And Close The Hood
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD WARNING! Two latches must be released to open the hood. • Be certain that the seatback is securely locked into 1. Pull the hood release lever located under the left side position.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 2. Move to the outside of the vehicle, the safety catch is located under the center front edge of the hood. Hood Safety Catch CAUTION! Hood Safety Catch Location To prevent possible damage, do not slam the hood to 3.
Page 136: Lights
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE operation of the headlights, parking lights, instrument CAUTION! (Continued) panel lights, instrument panel light dimming, and inte- secure both latches. Never drive your vehicle unless rior lights. the hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle.
Page 137: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Rotate the headlight switch to the second detent for Headlights On With Wipers (Available With headlight, parking light and instrument panel light op- Automatic Headlights Only) eration. When this feature is active, the headlights will turn on after the wipers are turned on if the headlight switch is Automatic Headlights —...
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mounted on the inside rearview mirror. This camera Sensitivity Control (not recommended), toggle high- detects vehicle specific light and automatically switches beam lever 6 full on/off cycles within 10 seconds of from high beams to low beams until the approaching ignition ON.
Page 139: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 To Deactivate If you turn the headlights, park lights or ignition switch ON again, the system will cancel the delay. 1. Pull the multifunction lever toward you (or rearward If you turn the headlights off before the ignition, they will in car) to manually deactivate the system (normal turn off in the normal manner.
Page 140: Lights-On Reminder
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If allowed by law in the country in which the vehicle was purchased the Daytime Running Lights can be turned on and off using the Uconnect® System, refer to “Uconnect® Settings” in “Understanding Your Instru- ment Panel”...
Page 141: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: High/Low Beam Switch Push the multifunction lever away from you to switch • If either light remains on and does not flash, or there is the headlights to high beam. Pull the multifunction lever a very fast flash rate, check for a defective outside light toward you to switch the headlights back to low beam.
Page 142: Interior Lights
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the UNLOCK button on the Remote Keyless Entry (RKE) Interior Lights transmitter is pressed, or when the dimmer control is The interior lights come on when a door is opened. turned fully upward, past the second detent. To protect the battery, the interior lights will turn off automatically 10 minutes after the ignition is moved to the LOCK position.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Dimmer Controls Instrument Panel Dimmer With the parking lights or headlights on, rotating the left Dome Light Position dimmer control upward will increase the brightness of Rotate the left dimmer control completely upward to the the instrument panel lights and lighted cupholders (if second detent to turn on the interior lights.
Page 144: Windshield Wipers And Washers
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Light Defeat (OFF) Rotate the left dimmer control to the extreme bottom “OFF” position. The interior lights will remain off when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the instrument panel dimmer control upward to the first detent.
Page 145: Intermittent Wiper System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Mist Feature CAUTION! Rotate the end of the lever downward to the Mist Turn the windshield wipers off when driving position to activate a single wipe cycle to clear off road through an automatic car wash. Damage to the wind- mist or spray from a passing vehicle.
Page 146: Headlights On With Wipers (Available With Automatic Headlights Only)
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE several wipe cycles after releasing the multifunction lever Headlights On With Wipers (Available With and then resume the intermittent interval previously Automatic Headlights Only) selected. When this feature is active, the headlights will turn on If you activate the washer while the windshield wiper is approximately 10 seconds after the wipers are turned on turned off, the wipers will operate for several wipe cycles...
Page 147: Rain Sensing Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 The Headlights On with Wipers feature can be turned on wiper sensitivity. Setting 4 can be used if the driver and off using the Uconnect® System, refer to “Uconnect® desires more sensitivity. Place the wiper switch in the Settings”...
Page 148: Tilt/Telescoping Steering Column
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE operate until the wiper switch is moved, vehicle speed TILT/TELESCOPING STEERING COLUMN is greater than 0 mph (0 km/h), or the outside tem- This feature allows you to tilt the steering column perature is greater than 32°F (0°C). upward or downward.
Page 149: Power Tilt/Telescoping Steering Column - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 To unlock the steering column, pull the lever downward. POWER TILT/TELESCOPING STEERING COLUMN To tilt the steering column, move the steering wheel — IF EQUIPPED upward or downward as desired. To lengthen or shorten This feature allows you to tilt the steering column the steering column, pull the steering wheel outward or upward or downward.
Page 150: Heated Steering Wheel - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
Page 151: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 The heated steering wheel control button is located WARNING! within the Uconnect® system. You can gain access to the control button through the climate screen or the controls • Persons who are unable to feel pain to the skin screen.
Page 152: To Activate
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elec- right side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
Page 153: To Set A Desired Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The speed increment shown is dependant on the chosen To Decrease Speed speed unit of U.S. (mph) or Metric (km/h): When the Electronic Speed Control is set, you can de- crease speed by pushing the SET - button. U.S.
Page 155: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 • If the button is continually pressed, the set speed will WARNING! continue to decrease until the button is released, then the new set speed will be established. Electronic Speed Control can be dangerous where the system cannot maintain a constant speed.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE need to reset your cruise control. ACC utilizes a radar WARNING! sensor designed to detect a vehicle directly ahead of you. • Adaptive Cruise Control (ACC) is a convenience NOTE: system. It is not a substitute for active driving •...
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WARNING! (Continued) WARNING! (Continued) • Cannot take street, traffic, and weather condi- • When driving in fog, heavy rain, heavy snow, sleet, tions into account, and may be limited upon heavy traffic, and complex driving situations (i.e., adverse sight distance conditions.
Page 158: Adaptive Cruise Control (Acc) Operation
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Normal (fixed speed) cruise control mode is for cruis- ing at a constant preset speed. For additional informa- tion, refer to “Normal (Fixed Speed) Cruise Control Mode” in this section. NOTE: The system will not react to preceding vehicles. Always be aware of the mode selected.
Page 159: Activating Adaptive Cruise Control (Acc)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 NOTE: Any chassis/suspension or tire size modifications NOTE: You cannot engage ACC under the following to the vehicle will effect the performance of the Adaptive conditions: Cruise Control and Forward Collision Warning System. •...
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adaptive Cruise Control Ready Adaptive Cruise Control Off To turn the system OFF, push and release the Adaptive WARNING! Cruise Control (ACC) ON/OFF button again. At this time, the system will turn off and the DID will display Leaving the Adaptive Cruise Control (ACC) system on “Adaptive Cruise Control (ACC) Off.”...
Page 161: To Set A Desired Acc Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • The system will not be controlling the distance be- WARNING! (Continued) tween your vehicle and the vehicle ahead. The vehicle could lose control and have a collision. Always leave speed will only be determined by the position of the the system off when you are not using it.
Page 162: To Turn Off
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A Trailer Sway Control (TSC) event occurs. WARNING! • The driver switches ESC to full-off mode. The Resume function should only be used if traffic and road conditions permit. Resuming a set speed To Turn Off that is too high or too low for prevailing traffic and The system will turn off and erase the set speed in...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 U.S. Speed (mph) To Decrease Speed While ACC is set, the set speed can be decreased by • Pressing the SET + button once will result in a 1 mph pressing the SET - button. increase in set speed.
Page 164: Setting The Following Distance In Acc
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Metric Speed (km/h) • The ACC system applies the brake down to 15 mph (24 km/h) when following a target vehicle. • Pressing the SET - button once will result in a 1 km/h decrease in set speed.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Distance Setting 4 Bars (Longest) Distance Setting 3 Bars (Long) I n f o r ma t i o n P r o v i d e d b y :...
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 2 Bars (Medium) Distance Setting 1 Bar (Short) I n f o r ma t i o n P r o v i d e d b y :...
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 To increase the distance setting, press the Distance Set- • The vehicle ahead moves out of your lane or view of ting — Increase button and release. Each time the button the sensor. is pressed, the distance setting increases by one bar •...
Page 168: Overtake Aid
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtake Aid When driving with ACC engaged and following a target vehicle, the system will provide an additional accelera- tion to assist in passing vehicles in front. This additional acceleration is triggered when the driver utilizes the left turn signal.
Page 169: Adaptive Cruise Control (Acc) Menu
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 ACC SET Adaptive Cruise Control (ACC) Menu The DID displays the current ACC system settings. The When ACC is set, the set speed will display in the DID is located in the center of the instrument cluster. The instrument cluster.
Page 170: Display Warnings And Maintenance
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE vehicle has left these areas. Under rare conditions, when Display Warnings And Maintenance the radar is not tracking any vehicles or objects in its path “Wipe Front Radar Sensor In Front Of Vehicle” this warning may temporarily occur.
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • Do not remove any screws from the sensor. Doing so NOTE: could cause an ACC system malfunction or failure and • If the “ACC/FCW Unavailable Wipe Front Radar require a sensor realignment. Sensor”...
Page 172: Precautions While Driving With Acc
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If this occurs, try activating ACC again later, following a key cycle. If the problem persists, see your authorized dealer. Precautions While Driving With ACC In certain driving situations, ACC may have detection issues.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Turns And Bends When driving on a curve with ACC engaged, the system may decrease the vehicle speed and acceleration for stability reasons, with no target vehicle detected. Once the vehicle is out of the curve the system will resume your original Set Speed.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in ACC may not detect a vehicle until it is completely in the your lane. Depending on the speed, vehicle load, traffic lane in which you are traveling.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead.
Page 176: General Information
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary This vehicle has systems that operate on radio frequency vehicles. For example, ACC will not react in situations that comply with Part 15 of the Federal Communications where the vehicle you are following exits your lane and Commission (FCC) rules and with Industry Canada...
Page 177: Normal (Fixed Speed) Electronic Speed Control Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Normal (Fixed Speed) Electronic Speed Control WARNING! Mode In the normal Cruise Control mode, the system will In addition to Adaptive Cruise Control mode, a Normal not react to vehicles ahead. In addition, the proximity (Fixed Speed) Electronic Speed Control mode is available warning does not activate and no alarm will sound for cruising at fixed speeds.
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Once a speed has been set a message (CRUISE CON- • If the button is continually pressed, the set speed will TROL SET TO MPH/KM) will appear indicating what continue to increase in 5 mph increments until the speed was set.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 • If the button is continually pressed, the set speed will To Cancel continue to decrease in 5 mph increments until the The following conditions will cancel the Normal (Fixed button is released. The decrease in set speed is re- Speed) Electronic Speed Control without clearing the flected in the DID display.
Page 180: Forward Collision Warning (Fcw) - If Equipped
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Resume Speed FORWARD COLLISION WARNING (FCW) — IF EQUIPPED To resume a previously set speed, push the RES button and release. Resume can be used at any speed above Forward Collision Warning (FCW) Operation 20 mph (32 km/h).
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: • The minimum speed for FCW activation is 5 mph (10 km/h). • The FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the course prediction.
Page 182: Turning Fcw On Or Off
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Changing the FCW status to “Off” prevents the system WARNING! (Continued) from warning you of a possible collision with the vehicle responsibility to avoid a collision by controlling the in front of you. vehicle via braking and steering.
Page 183: Service Fcw Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Changing the FCW status to the “Near” setting, allows Service FCW Warning the system to warn you of a possible collision with the If the system turns off, and the DID displays: vehicle in front of you when you are much closer. This •...
Page 184: Parksense® Sensors
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® will retain the last system state (enabled or ParkSense® Warning Display disabled) from the last ignition cycle when the ignition is The ParkSense® Warning screen will only be displayed if changed to the ON/RUN position. Sound and Display is selected from the Uconnect®...
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 If an obstacle is detected in the center rear region, the display will show a single solid arc in the center rear region and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the sound tone will change from slow, to fast, to continuous.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone/Solid Arc Slow Tone/Solid Arc I n f o r ma t i o n P r o v i d e d b y :...
Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: I n f o r ma t i o n P r o v i d e d b y :...
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING ALERTS Rear Greater than 79-59 in 59-47 in 47-39 in 39-25 in 25-12 in Less than Distance 79 in (200 cm) (200-150 cm) (150- (120- (100- (65-30 cm) 12 in (in/cm) 120 cm) 100 cm) 65 cm) (30 cm)
Page 189: Enabling And Disabling Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 the ParkSense switch is pressed and the system is dis- Enabling And Disabling ParkSense® abled or requires service, the ParkSense switch LED will ParkSense® can be enabled and disabled with the blink momentarily and then the LED will be ON. ParkSense®...
Page 190: Cleaning The Parksense® System
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE or “PARKSENSE UNAVAILABLE SERVICE REQUIRED” ParkSense® System Usage Precautions message for as long as the vehicle is in REVERSE. Under NOTE: this condition, ParkSense® will not operate. • Ensure that the rear bumper is free of snow, ice, mud, If “PARKSENSE UNAVAILABLE WIPE REAR SEN- dirt and debris to keep the ParkSense®...
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Information Display (DID) will display “PARKSENSE “PARKSENSE UNAVAILABLE SERVICE REQUIRED” OFF” message for as long as the vehicle is in RE- message to be displayed in the Driver Information VERSE. Display (DID). • ParkSense® will reduce the volume of the radio when CAUTION! it is sounding an audio tone.
Page 192: Parkview® Rear Back Up Camera - If Equipped
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE in the touchscreen display along with a caution note to WARNING! “check entire surroundings” across the top of the screen. After five seconds this note will disappear. Drivers must be careful when backing up even when using the Rear Park Assist system.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 When enabled, active guide lines are overlaid on the Different colored zones indicate the distance to the rear of image to illustrate the width of the vehicle and its the vehicle. projected backup path based on the steering wheel The following table shows the approximate distances for position.
Page 194: Overhead Console
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE CAUTION! The overhead console contains courtesy/reading lights • To avoid vehicle damage, ParkView® should only and sunglass storage. Universal Garage Door Opener be used as a parking aid. The ParkView® camera is (HomeLink®) button and a power sunroof switch may unable to view every obstacle or object in your also be included, if equipped.
Page 195: Courtesy/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 Courtesy/Reading Lights GARAGE DOOR OPENER — IF EQUIPPED At the forward end of the overhead console are two HomeLink® replaces up to three hand-held transmitters courtesy/reading lights. that operate devices such as garage door openers, motor- ized gates, lighting or home security systems.
Page 196: Before You Begin Programming Homelink
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system.
Page 197: Programming A Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Programming A Rolling Code For programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away there may be a light that blinks when the garage door from the HomeLink® button you wish to program while opener/device is in the LEARN/TRAIN mode.
Page 199: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Reprogramming A Single HomeLink® Button 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 (Rolling Code) cm) away from the HomeLink® button you wish to program while keeping the HomeLink® indicator To reprogram a channel that has been previously trained, light in view.
Page 200: Canadian/Gate Operator Programming
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the two remaining HomeLink® buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 • If the indicator light stays on constantly, program- cm) away from the HomeLink® button you wish to ming is complete and the garage door/device should program while keeping the HomeLink®...
Page 202: Using Homelink
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Without releasing button proceed with The HomeLink® Universal Transceiver is disabled when “Canadian/Gate Operator Programming” step 2 and the Vehicle Security Alarm is active. follow all remaining steps. Troubleshooting Tips Using HomeLink® If you are having trouble programming HomeLink®, To operate, push and release the programmed here are some of the most common solutions:...
Page 203: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 WARNING! WARNING! (Continued) use a garage door opener without these safety fea- Vehicle exhaust contains carbon monoxide, a danger- tures. Call toll-free 1–800–355–3515 or, on the Internet ous gas. Do not run your vehicle in the garage while at www.HomeLink.com for safety information or programming the transceiver.
Page 204: Power Sunroof - If Equipped
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun • The transmitter has been tested and it complies with visors on the overhead console. FCC and IC rules. Changes or modifications not ex- pressly approved by the party responsible for compli- ance could void the user’s authority to operate the device.
Page 205: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 WARNING! WARNING! (Continued) • Do not allow small children to operate the sunroof. • Never leave children unattended in a vehicle, or Never allow your fingers, other body parts, or any with access to an unlocked vehicle. Never leave the object, to project through the sunroof opening.
Page 206: Opening Sunroof - Manual Mode
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE movement and the sunroof will remain in a partially Opening Sunroof — Manual Mode closed condition until the switch is pushed and held To open the sunroof, press and hold the switch rearward forward again.
Page 207: Sunshade Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 sunroof position. During Express Vent operation, any with the sunroof open, adjust the sunroof opening to movement of the switch will stop the sunroof. minimize the buffeting or open any window. Sunshade Operation Sunroof Maintenance The sunshade can be opened manually.
Page 208: Electrical Power Outlets
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS Your vehicle is equipped with two 12 Volt (13 Amp) power outlets that can be used to power cellular phones, small electronics and other low powered electrical acces- sories. The 12 Volt power outlets have power available at all times.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Power Outlet — Center Console Power Outlet Fuse Locations NOTE: All accessories connected to these powered out- 1 — #12 Fuse 20A Yellow Power Outlet Integrated Center Stack lets should be removed or turned off when the vehicle is 2 —...
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) • Do not touch with wet hands. • Do not exceed the maximum power of 160 Watts (13 • Close the lid when not in use and while driving the Amps) at 12 Volts.
Page 211: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 CUPHOLDERS CAUTION! (Continued) Front Cupholders • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the The front cupholders are located in the center console. battery even more quickly. Only use these intermit- tently and with greater caution.
Page 212: Rear Cupholders
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s el- bows.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Glove Compartment Opened Glove Compartment Console Storage The center console has a storage compartment located underneath the armrest. The compartment contains a 12 Volt power outlet, and a molded-in coin holder (designed to hold various size coins). The center console may also be equipped with a Universal Consumer Interface (UCI).
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UCI supports Mini, 4G, Photo, Nano, 5G iPod® and WARNING! iPhone® devices. Refer to “Universal Consumer Interface (UCI) — If Equipped” in “Understanding Your Instru- Do not operate this vehicle with a console compart- ment Panel”...
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 NOTE: To prevent excessive battery drain, use the rear window defroster only when the engine is operating. CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window.
Page 216 I n f o r ma t i o n P r o v i d e d b y :...
Page 217 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..218 ▫ Customer Programmable Features — Uconnect® 8.4 Settings ......247 INSTRUMENT CLUSTER —...
Page 218 216 UNDERSTANDING YOUR INSTRUMENT PANEL iPod®/USB/MP3 CONTROL — IF EQUIPPED . .299 Uconnect® VOICE RECOGNITION QUICK TIPS ......316 STEERING WHEEL AUDIO CONTROLS —...
Page 219 UNDERSTANDING YOUR INSTRUMENT PANEL 217 ▫ Register (8.4A/8.4AN) ....325 ▫ Yelp® (8.4A/8.4AN)....328 ▫...
Page 220: Instrument Panel Features
218 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlets 5 — Keyless Start/Stop Button 2 — Instrument Cluster 6 — Trunk Release Button 3 — Glove Box 7 — Headlight Switch 4 — Media Center I n f o r ma t i o n P r o v i d e d b y :...
Page 221: Instrument Cluster - Srt
UNDERSTANDING YOUR INSTRUMENT PANEL 219 INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.4L I n f o r ma t i o n P r o v i d e d b y :...
Page 222: Instrument Cluster - Srt
220 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.2L Supercharged I n f o r ma t i o n P r o v i d e d b y :...
Page 223: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 221 engine start. The vehicle should be serviced if the MIL INSTRUMENT CLUSTER DESCRIPTIONS stays on through several of your typical driving cycles. In 1. Tachometer most situations, the vehicle will drive normally and will The red segments indicate the maximum permissible not require towing.
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: WARNING! (Continued) • A continuous chime will sound if the vehicle is operating conditions. This can cause a fire if you driven more than 1 mile (1.6 km) with either turn drive slowly or park over flammable substances such signal on.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 If the ABS light is on, the brake system should be serviced for you to make a record of the odometer reading before as soon as possible to restore the benefits of Anti-Lock the repair/service, so that you can be sure that it is Brakes.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL Seat Belt Warning Light will flash or remain on continu- The dual brake system provides a reserve braking capac- ously if the driver’s seat belt remains unbuckled after the ity in the event of a failure to a portion of the hydraulic bulb check or when driving.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 The light also will turn on when the parking brake is WARNING! (Continued) applied with the ignition switch in the ON/RUN posi- take longer to stop the vehicle. You could have a tion. collision. Have the vehicle checked immediately. NOTE: This light shows only that the parking brake is Vehicles equipped with the Anti-Lock Brake System applied.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Front Fog Light Indicator — If Equipped 16. Temperature Gauge This indicator will illuminate when the front fog The temperature gauge shows engine coolant tempera- lights are on. ture. Any reading within the normal range for a fully warm vehicle should be 200 F - 230 F which indicates that 13.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 As an added safety feature, your vehicle has been WARNING! equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when A hot engine cooling system is dangerous. You or one or more of your tires is significantly under-inflated.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL combined with the low tire pressure telltale. When the CAUTION! system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously The TPMS has been optimized for the original illuminated. This sequence will continue upon subse- equipment tires and wheels.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 18. Electronic Stability Control (ESC) OFF Indicator (kilometers) at speeds greater than 30 mph (48 km/h), see Light — If Equipped your authorized dealer as soon as possible to have the problem diagnosed and corrected. This light indicates the Electronic Stability Con- trol (ESC) is off.
Page 232: Driver Information Display (Did)
230 UNDERSTANDING YOUR INSTRUMENT PANEL buttons located on the left side of the steering wheel. The DRIVER INFORMATION DISPLAY (DID) DID Menu Items consists of the following: The Driver Information Display (DID) features an inter- active display which is located in the instrument cluster. •...
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 The system allows the driver to select information by Up And Down Arrow Buttons: pushing the following buttons mounted on the steering Using the Up or Down arrows allows you to wheel: cycles through the Main Menu Items. Changes the Main Screen area and Menu Title area.
Page 234: Engine Oil Life Reset
232 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • Within each submenu layer, the up/down arrows will allow the user to select the item of interest. • Holding the Up/Down or Left/Right arrow buttons will loop the user through the currently selected menu •...
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 chime has sounded, to indicate the next scheduled oil 2. Fully push the accelerator pedal, slowly, three times change interval. The engine oil change indicator system within 10 seconds. is duty cycle based, which means the engine oil change 3.
Page 236: Did Selectable Menu Items
234 UNDERSTANDING YOUR INSTRUMENT PANEL Use the steering wheel DID controls for the following NOTE: If the indicator message illuminates when you procedure(s): start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. 1. Without pushing the brake pedal, cycle the ignition to the ON/RUN position (do not start the engine.) DID Selectable Menu Items Push and release the UP or DOWN arrow buttons until...
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 Speedometer Vehicle Info Press and release the UP or DOWN arrow button until the Vehicle Info menu is highlighted in the DID. Push and Push and release the LEFT or RIGHT arrow release the RIGHT arrow button to enter the submenus button to toggle between the Speedometer items of Vehicle Info.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Torque Performance Features Engine Power WARNING! Air-Fuel Ratio — 6.2L Supercharged Measurement of vehicle statistics with the Perfor- Boost — 6.2L Supercharged mance Features is intended for off-highway or off- road use only and should not be done on any public Intercooler Water Temp —...
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 This mode provides performance based suspension tun- • 1/8 Mile Timer ing with improved handling and acceleration through an – Best electronic controlled dampening system. This system – Last reduces body roll and pitch in many driving situations –...
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL • Lap Timer • The time will continue to display until the OK button is pushed. • Lap History • Pushing the OK button will clear the current run time – Will list the last 5 lap with the best lap highlighted and display the vehicle’s best 0-60 mph (0-100 km/h) in green.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 • The time will continue to display until the OK button • The time and speed will continue to display until the is pushed. OK button is pushed. • Pushing the OK button will clear the current run time •...
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL • The time and speed will continue to display until the • The distance and speed measurements display while OK button is pushed. the event is taking place. • Pushing the OK button will clear the current run and •...
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Peak G-Force • As soon as the driver exits the Lap Timer pages the “current” timer will stop and the time will be reset to When selected, this screen displays all four G-Force 0:00.00 values (two lateral and two longitudinal). •...
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL • Each time the driver presses the OK button (while on • Units will change with the global change in units. the Lap Timer page) the current Lap Time populates Driver Assist the 1st spot and the rest of the data shifts down. Adaptive Cruise Control (ACC) Menu •...
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Push the SET + or the SET- button (located on the steering • The DID will return to the last display selected after wheel) and the following will display in the DID: five seconds of no ACC display activity. ACC SET For further information, refer to “Adaptive Cruise Con- trol (ACC) —...
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL • Lower end of gauge will be displayed in an amber Audio color and turn green as Fuel Economy improves. Push and release the UP or DOWN arrow button until the Audio Menu displays in the DID. •...
Page 247: Uconnect® Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Diagnostics — If Equipped • If the menu is exited before the end of codes is reached - when the driver re-enters the list will be restarted Push and release the UP or DOWN arrow button until from the beginning.
Page 248: Buttons On The Faceplate
246 UNDERSTANDING YOUR INSTRUMENT PANEL side. Turn the control knob to scroll through menus and change settings (i.e., 30, 60, 90), push the center of the control knob one or more times to select or change a setting (i.e., ON, OFF). Your Uconnect®...
Page 249: Customer Programmable Features - Uconnect
UNDERSTANDING YOUR INSTRUMENT PANEL 247 When making a selection, press the button on the touch- Customer Programmable Features — Uconnect® screen to enter the desired mode. Once in the desired mode, 8.4 Settings press and release the preferred setting until a check-mark Press the “SRT &...
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Brightness With Headlights ON • Set Theme — If Equipped When in this display, you may select the brightness with This feature will allow you to choose a theme for the the headlights on. Adjust the brightness with the “+” and display screen.
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 • Touchscreen Beep • Navigation Turn-By-Turn In Cluster — If Equipped When in this display, you may turn on or shut off the When this feature is selected, the turn-by-turn directions sound heard when a touchscreen button (button on the will appear in the display as the vehicle approaches a touchscreen) is pressed.
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL • Speed • Power Select from: “MPH” or “km/h.” Select from: “HP” (US), “HP” (UK), and “kW.” • Distance • Torque Select from: “mi” or “km.” Select from: “lb-ft” or “Nm.” • Fuel Consumption • After the desired setting has been selected, press the back arrow button on the touchscreen to return to the Select from: “MPG”...
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 • Show Command List setting has been selected. Press the back arrow button on the touchscreen to return to the previous menu. When in this display, you may change the Show Com- • Set Time Hours mand List settings.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL • Time Format Safety & Driving Assistance After pressing the “Safety & Driving Assistance” button This feature will allow you to select the time format on the touchscreen the following settings will be avail- display setting. Press the “Time Format” button on the able: touchscreen until a check-mark appears next to the 12hrs or 24hrs setting, showing that setting has been selected.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 For further information, refer to “Adaptive Cruise Con- equipped. The chime volume settings include LOW, trol (ACC)” in “Understanding The Features Of Your MEDIUM, and HIGH. The factory default volume setting Vehicle”. is MEDIUM. To make your selection, press the “ParkSense®...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL exterior mirrors as well as an audible alert when the turn display along with a caution note to “check entire sur- signal is on. When “Off” is selected, the Blind Spot roundings” across the top of the screen. After five sec- Monitor (BSM) system is deactivated.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 To set the ParkView® Backup Camera Delay press the and operating information. To make your selection, press “Controls” button on the touchscreen, the “settings” the “Hill Start Assist” button on the touchscreen, until a button on the touchscreen, then the “Safety & Driving check-mark appears next to setting, indicating that the Assistance”...
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL • Headlight Illumination On Approach Press the back arrow button on the touchscreen to return to the previous menu, or push the back button on the When this feature is selected, the headlights will activate faceplate.
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 press the “Daytime Running Lights” button on the touch- Doors & Locks screen, until a check-mark appears next to setting, indi- After pressing the “Doors & Locks” button on the touch- cating that the setting has been selected. Press the back screen the following settings will be available: arrow button on the touchscreen to return to the previous •...
Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL or without the sound horn on lock feature selected. To touchscreen until a check-mark appears next to setting, make your selection, press the “Flash Lights with Lock” showing that setting has been selected. Press the back button on the touchscreen, until a check-mark appears arrow button on the touchscreen to return to the previous next to setting, indicating that the setting has been...
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 NOTE: If the vehicle is programmed 1st Press Of Key Fob setting, showing that the setting has been selected. Press Unlocks “All Doors,” all doors will unlock no matter the back arrow button on the touchscreen to return to the which Passive Entry equipped door handle is grasped.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL “Remote Start” or “All Starts” until a check-mark ap- • Engine Off Power Delay pears next to setting, showing that setting has been When this feature is selected, the power window selected. Press the back arrow button on the touchscreen switches, radio, Uconnect®...
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 • Balance/Fade • Speed Adjusted Volume This feature allows you to adjust the Balance and Fade This feature increases or decreases volume relative to settings. Press and drag the speaker icon, use the arrows vehicle speed. To change the Speed Adjusted Volume to adjust, or tap the ‘C’...
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL button on the touchscreen, choose a level from –3 to +3. • Paired Audio Sources Press the back arrow button on the touchscreen to return This feature shows which audio devices are paired to the to the previous menu.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 • Subscription Information Restore Settings After pressing the “Restore Settings” button on the New vehicle purchasers or lessees will receive a free touchscreen the following settings will be available: limited time subscription to SiriusXM Satellite Radio with your radio.
Page 266: Guidelines For Race Track Use Of Your Srt
264 UNDERSTANDING YOUR INSTRUMENT PANEL Clear Personal Data • System Information After pressing the “Clear Personal Data Settings” button When System Information is selected, a System Informa- on the touchscreen the following settings will be avail- tion screen will appear displaying the system software able: version.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 situations. It is recommended that your vehicle operates Change the differential and manual transmission fluid in SPORT or TRACK modes during the track event. after every five hours of track use. Refer to “Maintaining Your Vehicle” for fluid levels & specifications. Prior to each track event/day: If equipped with a removable lower front fascia grille, it •...
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL Noise Vibration Harshness (NVH) countermeasures de- do a two lap cool down with minimal brake applica- signed into your vehicle. New components may need to tion. Make sure the brakes are not smoking. If they are, be installed to return the system to the original NVH do another cool down lap.
Page 269: Srt Performance Pages
UNDERSTANDING YOUR INSTRUMENT PANEL 267 6. Sometimes, a second burnish session is required. If the SRT Performance Pages brake pads start smelling in the next track session, Performance Pages is an application that provides a reduce speed and braking deceleration to burnish display for performance indicators, as received from the targets and follow steps 2 through 4.
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL The following describes each feature and its operation: WARNING! (Continued) Home use only and should not be done on any public road- ways. It is recommended that these features be used in a controlled environment and within the limits of the law.
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 When Home is selected, the following features will be Timers available: • A series of six images which can be selected by the user. • A left and right arrow to allow the user to scroll through vehicle images.
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL When the Timers Page is selected you will be able to select from following “Tickets”: • Current Pressing the “Current” button displays a “real time” summary of performance timers. • Last Pressing the “Last” button displays the last recorded run of performance timers.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 • Press the “Uconnect” button to save the runs to the • 0-100 MPH (0-160 km/h) Owner web page. Displays the time it takes for the vehicle to go from 0 to • Press the “Cancel” button to view the last timer 100 mph (0 to 160 km/h).
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL • Brake Speed Gauges 1 Displays the speed the vehicle is traveling when the brake pedal is depressed. NOTE: Brake Distance and Speed timers will only dis- play ready when vehicle is traveling at greater than 30 MPH (48 km/h).
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 • Oil Pressure Shows the actual oil pressure. • Oil Temperature Shows the actual oil temperature. • Battery Voltage Shows the actual battery voltage. • Trans Oil Temp (Auto Transmission Only) Shows the actual automatic transmission oil temperature. SRT Performance Pages —...
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure Shows the actual oil pressure. Gauges 2 SRT Performance Pages — Gauges 1 (6.4L) When selected, this screen displays the following values: • Coolant Temperature Shows the actual coolant temperature. SRT Performance Pages — Gauges 2 (6.4L Manual •...
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 • Intake Air Temperature Shows the actual intake air temperature. • Transmission Temperature (Automatic Transmission Only) Shows the actual transmission temperature. SRT Performance Pages — Gauges 2 (6.4L Automatic Transmission) When selected, this screen displays the following values: •...
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL When selected, this screen displays the following values: G-Force • Boost Pressure Shows the current value for boost pressure. • Air Fuel Ratio Shows the current value for the air fuel ratio. • Inter-Cooler (I/C) Coolant Temperature Shows the current value for the I/C coolant temperature.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 When G-Force is selected, the following features will be • Vehicle Speed available: Vehicle Speed measures the current speed of the vehicle • Lateral G-Force Left and Right in either mph or km/h, starting at 0 with no maximum value.
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL Engine SRT Performance Pages — Engine (6.2L Automatic Transmission) When selected, this screen displays the following values: SRT Performance Pages — Engine (6.4L Automatic Transmission) • Vehicle Speed Shows the actual vehicle speed. I n f o r ma t i o n P r o v i d e d b y :...
Page 281: Srt Drive Modes
UNDERSTANDING YOUR INSTRUMENT PANEL 279 • Instantaneous Horsepower/Kilowatts SRT Drive Modes Key FOB 6.2L Supercharged Engine — If Equipped Shows the instantaneous horsepower. • Instantaneous Torque Shows the instantaneous torque. • Oil Pressure (6.4L Only) Shows the actual oil pressure. •...
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL RED key FOB unlocks the full potential of the engine’s the SRT Drive Modes interface, and can be accessed by output, and allows the driver to select from two power pressing the “KEY FOB” button on the touchscreen in the levels within Drive Modes Set-Up.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 vehicle systems depending upon the type of driving • Selecting “Drive Modes” from the “SRT & Apps” behavior desired. The Drive Modes feature is controlled menu. through the Uconnect® radio and may be accessed by •...
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL The SRT Drive Modes main screen displays the current Track Mode drive mode and real-time status of the vehicle’s perfor- mance configuration. The selectable Drive Modes buttons are Track, Sport, Custom, or Default and will be high- lighted when displaying the current configuration.
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Sport Mode Default Mode Drive Modes (Sport) Drive Modes (Default) Pressing the “Sport” button on the touchscreen will activate the configuration for typical enthusiast driving. The Traction, Transmission, Steering, and Suspension systems are all set to their “Sport” settings highlighted in orange.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL The vehicle will start in Default Mode unless Valet mode Custom Mode is active. This mode is for typical driving conditions where the Traction and Transmission will be operating in their Street settings, which cannot be changed while in this mode.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 configuration that is saved for quick selection of your While in the Custom Drive Mode screen, press the favorite settings. While in Custom Mode, the Horse- “Custom Set-Up” button on the touchscreen to access the power, Traction, Transmission, Steering, Suspension, and selectable options.
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL Horsepower — If Equipped With 6.2L Supercharged NOTE: This selection is only available with the RED Engine RKE Key Fob “700+ HP”. • 500 Press the “500” button on the touchscreen to modify the output power of the engine to 500 horsepower. NOTE: This selection is available with the RED or BLACK RKE Key Fob “500 HP”.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Transmission — If Equipped With 8 Speed • Track Transmission Press the “Track” button on the touchscreen to provide the fastest shift speeds and will have the highest comfort trade-off. • Sport Press the “Sport” button on the touchscreen to provide faster shift speeds and will have a moderate comfort trade-off.
Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL Paddle Shifters • OFF Press the “OFF” button on the touchscreen to disable steering wheel paddle shifters. Traction Paddle Shifters • ON Press the “ON” button on the touchscreen to enable steering wheel paddle shifters. Traction I n f o r ma t i o n P r o v i d e d b y :...
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 • Track Suspension Press the “Track” button on the touchscreen to modify traction control to optimize track performance with the least stability control. • Sport Press the “Sport” button on the touchscreen to turn off traction control and reduce stability control.
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL • Sport Steering — If Equipped With 6.4L Engine Press the “Sport” button on the touchscreen to provide a firmer suspension stiffness with moderate comfort trade- off. • Street Press the “Street” button on the touchscreen to provide a balance of suspension stiffness and ride comfort for typical daily driving.
Page 293: Race Options
UNDERSTANDING YOUR INSTRUMENT PANEL 291 • Sport Race Options Press the “Sport” button on the touchscreen to provide greater steering control, requiring greater steering effort. • Street Press the “Street button on the touchscreen to provide a balance of steering control and steering effort. Race Options Press the “Race Options”...
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL Launch Control screen. Within Race Options, you can activate, deactivate, and adjust the RPM values for the Launch Control and Shift Light features. Launch Control WARNING! Launch Mode is intended for off-highway or off-road use only and should not be used on any public roadways.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 “Launch RPM Set-Up” to set the holding RPM. Launch Mode can be turned on or off by either pushing the Launch Control button on the instrument panel switch bank (if activated), or by pressing the “Cancel Launch Mode”...
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL For further information refer to “Drive Modes” in “Start- On” button on the touchscreen. Activation is shown on ing and Operating”. the Driver Information Display (DID). Pressing the “Shift Light RPM Set-Up” button on the touchscreen will take Shift Light you to the Shift Light RPM Set-Up screen.
Page 297: Valet Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 295 transmission) 1, 2, 3, 4, and 5–6 (manual transmission). Valet Mode Pressing and releasing the up/down arrow buttons on the touchscreen above and below each listed gear, the RPM values will change in increments of 250 RPM. Pressing and holding the arrows will change the RPM values in increments of 500 RPM, ranging from 2000–...
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL not set, so you are free to select any 4 digit numeric combination that will be easy to remember. While in Valet Mode the following vehicle configurations are set and locked to prevent unauthorized modification: •...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 NOTE: If your 4 digit PIN is lost or forgotten, the vehicle will exit Valet Mode after a battery disconnect for ap- proximately one minute. Reconnect the battery and cycle the ignition to the RUN position, the vehicle will be in Default Mode.
Page 300: Eco Mode - If Equipped With Automatic Transmission
298 UNDERSTANDING YOUR INSTRUMENT PANEL proved fuel economy at a trade-off with acceleration ECO Mode — If Equipped With Automatic performance. Increased engine exhaust noise and/or Transmission vibration may be noticed while Eco is active. This is normal and a result of the increased amount of operating conditions where the vehicle is allowed to operate in four cylinder shutoff mode (6.4L Only).
Page 301: Ipod®/Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 299 iPod®/USB/MP3 CONTROL — IF EQUIPPED This feature allows an iPod® or external USB device to be plugged into the USB port. Located in the front storage area of the center console, this feature allows an iPod®/MP3 player, or an external USB device, to be connected to the audio system.
Page 302: Steering Wheel Audio Controls - If Equipped
300 UNDERSTANDING YOUR INSTRUMENT PANEL may not fully support the iPod® control features. Please visit Apple’s website for software updates. For further information, refer to the Uconnect® User’s Manual. STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel.
Page 303: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 301 Pushing the center button will make the radio switch Media Mode between the various modes available (AM/FM/SXM/ Pushing the top of the switch once will go to the next AUX etc.). track on the selected media (AUX, Bluetooth®, SD Card). Pushing the bottom of the switch once will go to the The left-hand control is a rocker-type switch with a beginning of the current track, or to the beginning of the...
Page 304: Regulatory And Safety Information
302 UNDERSTANDING YOUR INSTRUMENT PANEL antenna, it is recommended that the radio volume be emitted is far less than the electromagnetic energy emit- turned down or off during mobile phone operation when ted by wireless devices such as mobile phones. However, not using Uconnect®...
Page 305: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 303 brouillage radioélectrique subi, même si le brouillage est • Increase the separation between the equipment and susceptible d’en compromettre le fonctionnement. receiver. NOTE: • Consult the dealer or an experienced radio technician for help. • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to CLIMATE CONTROLS Part 15 of the FCC Rules.
Page 306: General Overview
304 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Touchscreen General Overview Buttons On The Faceplate Buttons on the touchscreen are accessible on the Uconnect® system screen. The buttons on the faceplate are located below the Uconnect® screen. Uconnect® 8.4 Automatic Temperature Controls — Buttons On The Touchscreen Automatic Climate Controls —...
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 Button Descriptions (Applies To Both Buttons On The 4. AUTO Operation Button Faceplate And Buttons On The Touchscreen) Automatically controls the interior cabin temperature by 1. MAX A/C Button adjusting airflow distribution and amount. Performing this function will cause the system to switch between Press and release to change the current setting, the manual mode and automatic modes.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Rear Defrost Button CAUTION! (Continued) Press and release this button to turn on the rear window • Do not use scrapers, sharp instruments, or abrasive defroster and the heated outside mirrors (if equipped). window cleaners on the interior surface of the An indicator will illuminate when the rear window window.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 8. Passenger Temperature Control Down Button 10. Blower Control (Uconnect® 8.4 Radio Only) Blower control is used to regulate the amount of air Provides the passenger with independent temperature forced through the climate system. There are seven control.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Button On The Touchscreen • Bi-Level Mode Air comes from the instrument panel outlets and Use the small blower icon to reduce the blower setting floor outlets. A slight amount of air is directed and the large blower icon to increase the blower setting. through the defrost and side window demister outlets.
Page 311: Climate Control Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 309 12. Climate Control OFF Button 14. Driver Temperature Control Up Button (Uconnect® 8.4 Only) Press and release this button to turn the Climate Control ON/OFF. Provides the driver with independent temperature con- trol. Push the button on the faceplate for warmer tem- 13.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL button to turn off the air conditioning and manually MAX A/C adjust the blower and airflow mode settings. Also, make MAX A/C sets the control for maximum cooling perfor- sure to select only Panel, Bi-Level or Floor modes. mance.
Page 313: Automatic Temperature Control (Atc)
UNDERSTANDING YOUR INSTRUMENT PANEL 311 selected. Press the button a second time to turn off the 2. Next, adjust the temperature you would like the Recirculation mode and allow outside air into the vehicle. system to maintain by adjusting the driver and pas- senger temperature buttons on the faceplate or but- NOTE: In cold weather, use of Recirculation mode may tons on the touchscreen.
Page 314: Operating Tips
312 UNDERSTANDING YOUR INSTRUMENT PANEL • The temperature can be displayed in U.S. or Metric The operator can also select the direction of the airflow units selecting Uconnect® customer- by selecting one of the available mode settings. A/C programmable feature. Refer to the “Uconnect® Sys- operation and Recirculation control can also be manually tem Settings”...
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 coolant that meets the requirements of Chrysler Material Window Fogging Standard MS-12106 and 50% water is recommended. Interior fogging on the windshield can be quickly re- Refer to “Maintenance Procedures” in “Maintaining Your moved by turning the mode selector to Defrost. The Vehicle”...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL Outside Air Intake Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. In Winter months, make sure the air intake is clear of ice, slush, and snow.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 Control Setting Suggestions For Various Weather Conditions I n f o r ma t i o n P r o v i d e d b y :...
Page 318: Uconnect® Voice Recognition Quick Tips
316 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® VOICE RECOGNITION QUICK TIPS Introducing Uconnect® Start using Uconnect® Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect® 5.0 or 8.4A/8.4AN system. Uconnect®...
Page 319: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 317 4. Each time you give a Voice Command, you must first Get Started push either the VR or Phone button, wait until after All you need to control your Uconnect® system with the beep, then say your Voice Command. your voice are the buttons on your steering wheel.
Page 320: Basic Voice Commands
318 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect® system. Press the VR button . After the beep, say: • Cancel to stop a current voice session •...
Page 321: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 319 Press the VR button . After the beep, say: • Tune to ninety-five-point-five FM • Tune to Satellite Channel Hits 1 TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.”...
Page 322: Media
320 UNDERSTANDING YOUR INSTRUMENT PANEL Press the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist. • Change source to Bluetooth® • Change source to iPod® •...
Page 323: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 321 Press the Phone button . After the beep, say one of the following commands: • Call John Smith • Dial 123-456-7890 and follow the system prompts • Redial (call previous outgoing phone number) • Call back (call previous incoming phone number) TIP: When providing a Voice Command, press the Phone button...
Page 324: Voice Text Reply
322 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Once an incoming text message is read to you, push the Phone button . After the beep, say: “Reply” 2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.
Page 325: Climate (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 323 TIP: Your mobile phone must have the full implementa- TIP: Voice Command for Climate may only be used to tion of the Message Access Profile (MAP) to take advan- adjust the interior temperature of your vehicle. Voice tage of this feature.
Page 326: Navigation (8.4A/8.4An)
324 UNDERSTANDING YOUR INSTRUMENT PANEL Navigation (8.4A/8.4AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1.
Page 327: Register (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 325 press the Apps button on the 8.4-inch touchscreen to get Roadside Assistance Call started. Detailed registration instructions can be found Wi-Fi Hotspot*** on the next page. **If vehicle is equipped. *Uconnect® Access is available only on equipped ve- ***Extra charges apply.
Page 328: Mobile App (8.4A/8.4An)
326 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Click on the link inside the email within 72 hours and Mobile App (8.4A/8.4AN) complete the easy online registration process to create Securely link your mobile device to your vehicle with the a personal Mopar® Owner Connect account linked to Uconnect®...
Page 329: Voice Texting (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 327 Download the Uconnect® Access App to a compatible 2. Listen to the prompt. After the beep, dictate the Apple® or Android® mobile devices. All you need to do message you would like to send. Wait for Uconnect® to process your message.
Page 330: Yelp® (8.4A/8.4An)
328 UNDERSTANDING YOUR INSTRUMENT PANEL Yelp® (8.4A/8.4AN) Once registered with Uconnect® Access, you can use your voice to search for the most popular places or things around you. 1. Press the VR button . After the beep, say: “Launch YELP.” 2.
Page 331: Siriusxm Travel Link™ (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 329 SiriusXM Travel Link™ (8.4A/8.4AN) Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect®...
Page 332: Additional Information
330 UNDERSTANDING YOUR INSTRUMENT PANEL • Canadian residents call 1-800-465-2001 (English) or Additional Information 1-800-387-9983 (French) © 2014 Chrysler Group LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Mon. – Fri., 7:00 am – 12:00 am, ET Owner Connect is a trademark of Chrysler Group LLC.
Page 333: Starting And Operating
STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....335 MANUAL TRANSMISSION — IF EQUIPPED . .343 ▫ Manual Transmission — If Equipped ..335 ▫...
Page 334 332 STARTING AND OPERATING ▫ Eight-Speed Automatic Transmission — POWER STEERING — 6.2L SUPERCHARGED If Equipped ......350 ENGINE .
Page 335 STARTING AND OPERATING 333 ▫ ESC Activation/Malfunction Indicator Light And ▫ Summer Or Three Season Tires — ESC OFF Indicator Light ....389 If Equipped......406 ▫...
Page 336 334 STARTING AND OPERATING ▫ Premium System ..... .417 ▫ Fuel Filler Cap (Gas Cap) ....425 ▫...
Page 337: Starting Procedures
STARTING AND OPERATING 335 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the Key Fob in or near the vehicle (or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children), and do not present, instruct all other occupants to buckle their seat leave the ignition of a vehicle equipped with...
Page 338: Automatic Transmission - If Equipped
336 STARTING AND OPERATING Press the clutch pedal fully to the floor, and cycle the Automatic Transmission — If Equipped ignition switch to the START position and release when The shift lever must be in the NEUTRAL or PARK the engine starts. If the engine fails to start within 15 position before you can start the engine.
Page 339: Keyless Enter-N-Go
STARTING AND OPERATING 337 Using Fob With Integrated Key (Tip Start) Keyless Enter-N-Go™ NOTE: Normal starting of either a cold or a warm This feature allows the driver to oper- engine is obtained without pumping or pressing the ate the ignition switch with the push accelerator pedal.
Page 340 338 STARTING AND OPERATING 3. The system takes over and attempts to start the 3. If you wish to stop the cranking of the engine prior to vehicle. If the vehicle fails to start, the starter will the engine starting, release the button. disengage automatically after 10 seconds.
Page 341 STARTING AND OPERATING 339 position. If the shift lever is not in PARK and the 3. Place the shift lever in first gear or REVERSE and then ENGINE START/STOP button is pressed once, the apply the parking brake. Driver Information Display (DID) will display a “VE- NOTE: HICLE NOT IN PARK”...
Page 342: Extreme Cold Weather (Below -20°F Or −29°C)
340 STARTING AND OPERATING Keyless Enter-N-Go™ Functions — With Driver’s Extreme Cold Weather (Below –20°F Or −29°C) Foot OFF The Brake Pedal/Clutch Pedal (In PARK To ensure reliable starting at these temperatures, use of Or NEUTRAL Position) an externally powered electric engine block heater (avail- The Keyless Enter-N-Go™...
Page 343 STARTING AND OPERATING 341 Clearing A Flooded Engine (Using ENGINE WARNING! (Continued) START/STOP Button) — Automatic Transmission • Do not attempt to push or tow your vehicle to get it Only started. Vehicles equipped with an automatic trans- If the engine fails to start after you have followed the mission cannot be started this way.
Page 344: After Starting
342 STARTING AND OPERATING Clearing A Flooded Engine (Using ENGINE ENGINE BLOCK HEATER — IF EQUIPPED START/STOP Button) — Manual Transmission The engine block heater warms the engine, and permits Only quicker starts in cold weather. Connect the cord to a If the engine fails to start after you have followed the standard 110-115 Volt AC electrical outlet with a “Normal Starting”...
Page 345: Manual Transmission - If Equipped
STARTING AND OPERATING 343 MANUAL TRANSMISSION — IF EQUIPPED CAUTION! Six-Speed Manual Transmission • Never drive with your foot resting on the clutch pedal, or try to hold the vehicle on a hill with the WARNING! clutch pedal partially engaged, as this will cause abnormal wear on the clutch.
Page 346 344 STARTING AND OPERATING NOTE: During cold weather, you may experience in- NOTE: creased effort in shifting until the transmission fluid • Your vehicle is equipped with a transmission reverse warms up. This is normal. inhibitor system. When vehicle speed is greater than 3 mph (5 km/h), the reverse inhibitor activates to help prevent shifts into REVERSE.
Page 347: Shifting
STARTING AND OPERATING 345 The spring will try to pull the shift lever toward third and Shifting fourth gear. Make sure you move the shift lever into Fully press the clutch pedal and lift your foot off the second or fifth gear. If you let the shift lever move in the accelerator pedal before shifting gears.
Page 348: Recommended Shift Speeds
346 STARTING AND OPERATING Recommended Shift Speeds To utilize your manual transmission efficiently for fuel economy, it should be upshifted as listed in recom- mended shift speed chart. MANUAL TRANSMISSION RECOMMENDED SHIFT SPEEDS Engine 6.2L Supercharged (km/h) (32) (40) (67) 6.4L (km/h) (32)
Page 349: 1-4 Skip Shift
STARTING AND OPERATING 347 1–4 Skip Shift WARNING! There are times when you must shift the transmission Skipping more than one gear while downshifting, directly from first gear to fourth gear instead of from first could cause you to lose control of your vehicle. You gear to second gear.
Page 350: Automatic Transmission
348 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! (Continued) • Unintended movement of a vehicle could injure WARNING! those in or near the vehicle. As with all vehicles, • It is dangerous to shift out of PARK or NEUTRAL you should never exit a vehicle while the engine is if the engine speed is higher than idle speed.
Page 351 STARTING AND OPERATING 349 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with Damage to the transmission may occur if the follow- access to an unlocked vehicle. Allowing children to ing precautions are not observed: be in a vehicle unattended is dangerous for a •...
Page 352: Key Ignition Park Interlock
350 STARTING AND OPERATING Key Ignition Park Interlock Eight-Speed Automatic Transmission — If Equipped This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in PARK The transmission gear range (PRNDM) is displayed both before the engine can be turned off.
Page 353 STARTING AND OPERATING 351 Only shift from DRIVE to PARK or REVERSE when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has PARK, REVERSE, NEU- TRAL, DRIVE, and MANUAL (Autostick®) shift posi- tions.
Page 354 352 STARTING AND OPERATING NOTE: If the shift lever cannot be moved to the PARK, Never attempt to use PARK while the vehicle is in REVERSE, or NEUTRAL position (when pushed for- motion. Apply the parking brake when leaving the ward) it is probably in the MANUAL (AutoStick®, +/-) vehicle in this range.
Page 355 STARTING AND OPERATING 353 WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others • Unintended movement of a vehicle could injure if it is not in PARK. Check by trying to move the those in or near the vehicle. As with all vehicles, shift lever out of PARK with the brake pedal you should never exit a vehicle while the engine is released.
Page 356 354 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with • Before moving the shift lever out of PARK, you access to an unlocked vehicle. Allowing children to must start the engine and also press the brake be in a vehicle unattended is dangerous for a pedal.
Page 357 STARTING AND OPERATING 355 • With brake pedal released, verify that the shift lever WARNING! (Continued) will not move out of PARK. practices that limit your response to changing traffic REVERSE (R) or road conditions. You might lose control of the vehicle and have a collision.
Page 358 356 STARTING AND OPERATING automatically upshifts through all forward gears. The MANUAL (M) DRIVE position provides optimum driving characteris- The MANUAL (M, +/-) position (beside the DRIVE tics under all normal operating conditions. position) enables full manual control of transmission shifting (also known as AutoStick®...
Page 359 STARTING AND OPERATING 357 restarted. The Malfunction Indicator Light (MIL) may be 3. Press and hold the ignition switch until the engine illuminated. A message in the instrument cluster will turns OFF. inform the driver of the more serious conditions, and 4.
Page 360: Autostick
358 STARTING AND OPERATING AUTOSTICK Steering Wheel Mounted Paddle Shifters Or Console Mounted Shifter AutoStick® is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle. AutoStick® allows you to maximize en- gine braking, eliminate undesirable upshifts and down- shifts, and improve overall vehicle performance.
Page 361 STARTING AND OPERATING 359 DRIVE position). The current transmission gear will be In AutoStick® mode, the transmission will shift up or displayed in the instrument cluster, along with a high- down when (+/-) is manually selected by the driver lighted M (Manual) indication. When the shift lever is (using the shift lever, or the shift paddles [if equipped]), in the MANUAL (M) position, tap the shift lever forward unless an engine lugging or overspeed condition would...
Page 362 360 STARTING AND OPERATING • The transmission will automatically downshift as the • Holding the (-) paddle depressed (if equipped), or vehicle slows (to prevent engine lugging) and will holding the shift lever in the (-) position, will down- display the current gear. shift the transmission to the lowest gear possible at the current speed.
Page 363: Drive Modes
STARTING AND OPERATING 361 WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. DRIVE MODES Your SRT vehicle is equipped with a SRT Drive Mode feature.
Page 364 362 STARTING AND OPERATING • SPORT Mode — SPORT Mode is a pre-defined con- figuration optimized for typical enthusiast driving. The ABS, Transmission, Steering, and Suspension sys- tems are all set to their SPORT settings. Steering wheel mounted paddle shifters are enabled. •...
Page 365 STARTING AND OPERATING 363 Listed below is a description of each of these settings: • Sport — turns off traction control and reduces stability control. Transmission (Trans) • Street — provides full traction control and full stability • Track — provides the fastest shift speeds and has the control.
Page 366 364 STARTING AND OPERATING • Sport — provides greater steering control, requiring • DEFAULT — DEFAULT Mode will be activated auto- greater steering effort. matically when restarting the vehicle unless Valet mode is active. This mode is for typical driving con- •...
Page 367 STARTING AND OPERATING 365 • VALET — To enter Valet Mode the operator must • The Launch Control button is disabled. select it from the Drive Modes interface and enter a 4 NOTE: digit PIN code. The PIN code is not predetermined, so the operator is free to select any 4 digit numeric •...
Page 368: Launch Mode - If Equipped
366 STARTING AND OPERATING Preconditions: Launch Mode — If Equipped This vehicle is equipped with a Launch Control system • Launch control should not be used on public roads. that is designed to allow the driver to achieve maximum Always check track conditions and the surrounding vehicle acceleration in a straight line.
Page 369 STARTING AND OPERATING 367 Automatic Transmission — If Equipped 5. Make sure the steering wheel is pointing straight. Launch Control is only available when the following 6. Hold the brake and make sure the vehicle is in procedure is followed: “Drive”.
Page 370 368 STARTING AND OPERATING Launch control will be active until the vehicle reaches Manual Transmission — If Equipped 62 mph (100 km/h), at which point the ESC system will Vehicles with a manual transmission have an adjustable return to its current ESC mode. launch RPM controlled through the Uconnect®...
Page 371 STARTING AND OPERATING 369 4. Make sure the vehicle is not moving. continue to hold wide open throttle to launch execute shifts. Refer to “Manual Transmission – Shifting” in 5. Make sure the steering wheel is pointing straight. this section for further information. 6.
Page 372: Guidelines For Track Use
370 STARTING AND OPERATING • The “ESC OFF” button is pressed to change the ESC situations. It is recommended that your vehicle oper- system to another mode. One press puts the ESC ates in SPORT or TRACK modes during the track system into ESC Full-On.
Page 373 STARTING AND OPERATING 371 • If equipped with a removable lower front fascia grille, Track burnishing your brakes: it is recommended to remove it for track use during To avoid “green lining fade” during track use, the brake warm/hot weather to improve cooling airflow to pads and rotors must have a thermal burnish for factory critical powertrain and cooling system components.
Page 374: Driving On Slippery Surfaces
372 STARTING AND OPERATING 4. Allow vehicle to sit and cool in the paddock for at least 8. Rotors that pulsate during track use should be re- 30 min. If an infrared thermal gun is available, allow placed. Resurfacing of the rotors is not recommended, rotors to cool to 200°F before going back out.
Page 375: Traction
STARTING AND OPERATING 373 2. Slow down if the road has standing water or puddles. WARNING! 3. Replace tires when tread wear indicators first become Rapid acceleration on slippery surfaces is dangerous. visible. Unequal traction can cause sudden pulling of the rear 4.
Page 376: Flowing/Rising Water
374 STARTING AND OPERATING CAUTION! WARNING! (Continued) water. Furthermore, flowing and/or rising water can • Due to lower ground clearance, driving your ve- carry your vehicle away swiftly. Failure to follow this hicle up steep driveways, approach ramps or near warning may result in injuries that are serious or parking blocks may cause damage to the front fatal to you, your passengers, and others around you.
Page 377 STARTING AND OPERATING 375 WARNING! (Continued) CAUTION! (Continued) • Driving through standing water limits your vehi- • Determine the condition of the road or the path cle’s braking capabilities, which increases stopping that is under water and if there are any obstacles in distances.
Page 378: Power Steering - 6.4L Engine
376 STARTING AND OPERATING CAUTION! (Continued) WARNING! • Getting water inside your vehicle’s engine can Continued operation with reduced assist could pose cause it to lock up and stall out, and cause serious a safety risk to yourself and others. Service should be internal damage to the engine.
Page 379: Power Steering - 6.2L Supercharged Engine
STARTING AND OPERATING 377 NOTE: If for some reason the power assist is interrupted, it will still be possible to steer your vehicle. Under these condi- • Even if the power steering assistance is no longer tions, you will observe a substantial increase in steering operational, it is still possible to steer the vehicle.
Page 380: Fuel Saver Technology - If Equipped
378 STARTING AND OPERATING NOTE: This system may take some time to return to full WARNING! functionality after a battery disconnect. Continued operation with reduced power steering PARKING BRAKE assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. Before leaving the vehicle, make sure that the parking brake is fully applied and place the shift lever in the PARK or REVERSE (manual transmission only) position.
Page 381: Manual Transmission - If Equipped
STARTING AND OPERATING 379 • This light only shows that the parking brake is ap- plied. It does not show the degree of brake application. When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade.
Page 382 380 STARTING AND OPERATING WARNING! • Never use the PARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle.
Page 383: Brake System
STARTING AND OPERATING 381 WARNING! (Continued) CAUTION! • Do not leave the Key Fob in or near the vehicle (or If the “Brake Warning Light” remains on with the in a location accessible to children), and do not parking brake released, a brake system malfunction leave the ignition of a vehicle equipped with is indicated.
Page 384: Electronic Brake Control System
382 STARTING AND OPERATING In the event power assist is lost for any reason (for (BAS), and the Electronic Stability Control (ESC). These example, repeated brake applications with the engine systems work together to enhance both vehicle stability OFF) the brakes will still function. The effort required to and control in various driving conditions.
Page 385: Traction Control System (Tcs)
STARTING AND OPERATING 383 A feature of the TCS system functions similar to a WARNING! limited-slip differential and controls the wheel spin across a driven axle. If one wheel on a driven axle is The ABS cannot prevent the natural laws of physics spinning faster than the other, the system will apply the from acting on the vehicle, nor can it increase the brake of the spinning wheel.
Page 386: Hill Start Assist (Hsa)
384 STARTING AND OPERATING Applying the brakes very quickly results in the best BAS Hill Start Assist (HSA) assistance. To receive the benefits of this system, you The HSA system is designed to assist the driver when must apply continuous brake pedal pressure during the starting a vehicle from a stop on a hill.
Page 387: Electronic Stability Control (Esc)
STARTING AND OPERATING 385 • Gear selection matches vehicle uphill direction (i.e., Electronic Stability Control (ESC) vehicle facing uphill is in forward gear; vehicle back- This system enhances directional control and stability of ing uphill is in REVERSE gear). the vehicle under various driving conditions. The ESC corrects for oversteering and understeering the vehicle WARNING! by applying the brake of the appropriate wheel.
Page 388 386 STARTING AND OPERATING • Understeer - when the vehicle is turning less than ESC Operating Modes appropriate for the steering wheel position. The ESC system has four available operating modes: Street Mode WARNING! This is the normal operating mode for the ESC. When- The Electronic Stability Control System (ESC) cannot ever the vehicle is started, the ESC system will be in this prevent the natural laws of physics from acting on...
Page 389 STARTING AND OPERATING 387 Track Mode Once the situation requiring “Sport Mode” is over- come, turn the ESC ON again by momentarily pressing Track Mode is intended to be used when driving on a the “ESC Off” switch. This may be done while the track.
Page 390 388 STARTING AND OPERATING “ESC Off” switch for five seconds while the vehicle is WARNING! (Continued) stopped with the engine running. After five seconds, a unavailable. In an emergency evasive maneuver, the chime will sound, and the “ESC off” message will appear ESC system will not engage to assist in maintaining in the Driver Information Display (DID).
Page 391: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 389 flashes when TCS is active. If the “ESC Activation/ ESC Activation/Malfunction Indicator Light And Malfunction Indicator Light” begins to flash during ac- ESC OFF Indicator Light celeration, ease up on the accelerator and apply as little The “ESC Activation/Malfunction Indicator throttle as possible.
Page 392: Synchronizing Esc
390 STARTING AND OPERATING The “ESC OFF Indicator Light” indicates the TIRE SAFETY INFORMATION Electronic Stability Control (ESC) is partially Tire Markings off or full off. Synchronizing ESC If the power supply is interrupted (battery disconnected discharged), “ESC Activation/Malfunction Indicator Light” may illuminate with the engine running.
Page 393 STARTING AND OPERATING 391 NOTE: • Temporary spare tires are designed for temporary emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 394 392 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 395 STARTING AND OPERATING 393 EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
Page 396: Tire Identification Number (Tin)
394 STARTING AND OPERATING Look for the TIN on the outboard side of black sidewall Tire Identification Number (TIN) tires as mounted on the vehicle. If the TIN is not found on The TIN may be found on one or both sides of the tire, the outboard side, then you will find it on the inboard however, the date code may only be on one side.
Page 397 STARTING AND OPERATING 395 EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) – 01 means the year 2001 – Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured.
Page 398: Tire Terminology And Definitions
396 STARTING AND OPERATING Tire Terminology And Definitions Term Definition The vehicle B-Pillar is the structural member of the body located B-Pillar behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 399: Tire Loading And Tire Pressure
STARTING AND OPERATING 397 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door) I n f o r ma t i o n P r o v i d e d b y :...
Page 400 398 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. I n f o r ma t i o n P r o v i d e d b y :...
Page 401 STARTING AND OPERATING 399 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 402 400 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 403 STARTING AND OPERATING 401 I n f o r ma t i o n P r o v i d e d b y :...
Page 404: Tires - General Information
402 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 405: Tire Inflation Pressures
STARTING AND OPERATING 403 Economy WARNING! (Continued) Under-inflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 406 404 STARTING AND OPERATING At least once a month: The cold tire inflation pressure must not exceed the maximum inflation pressure molded into the tire side- • Check and adjust tire pressure with a good quality wall. pocket-type pressure gauge. Do not make a visual judge- Check tire pressures more often if subject to a wide range ment when determining proper inflation.
Page 407: Radial Ply Tires
STARTING AND OPERATING 405 Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds and WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 408: All Season Tires - If Equipped
406 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and on ice. If your vehicle is equipped with summer tires, be additional information. aware these tires are not designed for winter or cold driving conditions. For more information, contact a au- Damaged Run Flat tires, or Run Flat tires that have thorized dealer.
Page 409: Snow Tires
STARTING AND OPERATING 407 While studded tires improve performance on ice, skid Snow Tires and traction capability on wet or dry surfaces may be Some areas of the country require the use of snow tires poorer than that of non-studded tires. Some states pro- during the winter.
Page 410: Tread Wear Indicators
408 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) for more than 30 seconds continu- ously when you are stuck, and do not let anyone near a spinning wheel, no matter what the speed.
Page 411: Life Of Tire
STARTING AND OPERATING 409 tread wear indicators, the tire should be replaced. Refer tread life. Rotation of these tires per the vehicle main- to “Replacement Tires” in this section for further infor- tenance schedule is highly recommended. mation. WARNING! Life Of Tire Tires and the spare tire should be replaced after six The service life of a tire is dependent upon varying years, regardless of the remaining tread.
Page 412 410 STARTING AND OPERATING wear and correct cold tire inflation pressures. The manu- you may have on tire specifications or capability. Failure facturer strongly recommends that you use tires equiva- to use equivalent replacement tires may adversely affect lent to the originals in size, quality and performance the safety, handling, and ride of your vehicle.
Page 413: Tire Chains (Traction Devices)
STARTING AND OPERATING 411 TIRE CHAINS (TRACTION DEVICES) WARNING! (Continued) Use of traction devices require sufficient tire-to-body • Never use a tire with a smaller load index or clearance. Follow these recommendations to guard capacity, other than what was originally equipped against damage.
Page 414: Tire Rotation Recommendations
412 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Observe the traction device manufacturer’s instruc- To avoid damage to your vehicle or tires, observe the tions on the method of installation, operating following precautions: speed, and conditions for use. Always use the •...
Page 415: Tire Rotation - Same Tire Size On Front And Rear Axle
STARTING AND OPERATING 413 tires. Rotation will increase tread life, help to maintain mud, snow, and wet traction levels, and contribute to a smooth, quiet ride. Refer to the “Maintenance Schedule” for the proper maintenance intervals. Remember, more frequent rota- tion is permissible if desired.
Page 416: Tire Pressure Monitor System (Tpms)
414 STARTING AND OPERATING The tire pressure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pressure will decrease. Tire pressure should always be set based on cold inflation tire pressure.
Page 417 STARTING AND OPERATING 415 The TPMS will continue to warn the driver of low tire For example, your vehicle may have a recommended pressure as long as the condition exists, and will not turn cold (parked for more than three hours) placard pressure off until the tire pressure is at or above the recommended of 30 psi (207 kPa).
Page 418 416 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance or to provide warning of a tire failure equipment tires and wheels. TPMS pressures and or condition.
Page 419: Premium System
STARTING AND OPERATING 417 • Seasonal temperature changes will affect tire pressure, • Various TPMS messages, which display in the Driver and the TPMS will monitor the actual tire pressure in Information Display (DID), and the tire. • TPM Telltale Light Premium System The Tire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to...
Page 420 418 STARTING AND OPERATING Tire Pressure Monitoring Low Pressure Warnings original color, and the pressure values shown in the “TPM Telltale Light” will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph The “TPM Telltale Light”...
Page 421 STARTING AND OPERATING 419 longer display, and a pressure value will display in place message is then followed with a graphic display with of the dashes. A system fault can occur due to any of the pressure values still shown. This indicates that the pres- following: sure values are still being received from the TPM sensors but they may not be located in the correct vehicle...
Page 422: General Information
420 STARTING AND OPERATING 3. After driving the vehicle for up to 20 minutes above low-pressure warning limit in any of the four active 15 mph (24 km/h), the “TPM Telltale Light” will flash road tires. The vehicle may need to be driven for up to on and off for 75 seconds and then remain on solid.
Page 423: Fuel Requirements
STARTING AND OPERATING 421 Over 40 auto manufacturers worldwide have issued and FUEL REQUIREMENTS endorsed consistent gasoline specifications (the World- 6.2L Supercharged And 6.4L Engine wide Fuel Charter, WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, The 6.2L supercharged engine and 6.4L and durability for your vehicle.
Page 424: Gasoline/Oxygenate Blends
422 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-Flex Fuel Vehicles (FFV) are compatible with gaso- genates such as Ethanol. line containing 10% ethanol (E10). Gasoline with higher ethanol content may void the New Vehicle Limited CAUTION! Warranty.
Page 425: Mmt In Gasoline
STARTING AND OPERATING 423 To fix a Non-FFV vehicle inadvertently fueled once with without MMT be used in your vehicle. The MMT content E-85 perform the following: of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether •...
Page 426: Fuel System Cautions
424 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives, which are now being CAUTION! sold as octane enhancers, is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentrations performance: of methanol.
Page 427: Carbon Monoxide Warnings
STARTING AND OPERATING 425 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 428 426 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. •...
Page 429: Loose Fuel Filler Cap Message
STARTING AND OPERATING 427 Loose Fuel Filler Cap Message WARNING! (Continued) If the vehicle diagnostic system determines that the fuel • Never add fuel to the vehicle when the engine is filler cap is loose, improperly installed, or damaged, a running.
Page 430: Vehicle Loading
428 STARTING AND OPERATING • Gross Axle Weight Rating (GAWR) rear VEHICLE LOADING The load carrying capacity of your vehicle is shown on • Vehicle Identification Number (VIN) the “Vehicle Certification Label”. This information • Type of Vehicle should be used for passenger and luggage loading as •...
Page 431: Overloading
STARTING AND OPERATING 429 Figure out the weight on the front and rear of the vehicle WARNING! separately. It is important that you distribute the load evenly over the front and rear axles. Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front Overloading can cause potential safety hazards and or rear GAWR.
Page 432: Loading
430 STARTING AND OPERATING NOTE: Refer to the “Vehicle Certification Label” affixed Loading to the rear of the driver’s door for your vehicle’s GVWR To load your vehicle properly, first figure out its empty and GAWRs. weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as TRAILER TOWING evenly as possible.
Page 433: Recreational Towing
STARTING AND OPERATING 431 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Wheels OFF The Towing Condition Manual Transmission Automatic Transmission Ground Flat Tow None • Transmission in NEUTRAL NOT ALLOWED • 65 mph (105 km/h) maximum speed Dolly Tow Front Not Recommended...
Page 434 432 STARTING AND OPERATING Automatic Transmission — If Equipped Manual Transmission — If Equipped Recreational towing (with rear wheels on the ground) is Vehicles with a manual transmission may be flat towed NOT ALLOWED. The only acceptable method for tow- (with all four wheels on the ground) under the following ing this vehicle (behind another vehicle) is on a vehicle conditions:...
Page 435 STARTING AND OPERATING 433 CAUTION! Towing this vehicle in violation of the above require- ments can cause severe engine and/or transmission damage. Damage from improper towing is not cov- ered under the New Vehicle Limited Warranty. I n f o r ma t i o n P r o v i d e d b y :...
Page 436 I n f o r ma t i o n P r o v i d e d b y :...
Page 437: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...436 JUMP-STARTING PROCEDURES ...449 IF YOUR ENGINE OVERHEATS ... .436 ▫...
Page 438: Hazard Warning Flashers
436 WHAT TO DO IN EMERGENCIES NOTE: With extended use the Hazard Warning flashers HAZARD WARNING FLASHERS may wear down your battery. The Hazard Warning flasher switch is located in the switch bank near the bottom center of the instrument IF YOUR ENGINE OVERHEATS panel.
Page 439: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 437 • You can also turn the temperature control to maximum WARNING! heat, the mode control to floor and the blower control to high. This allows the heater core to act as a You or others can be badly burned by hot engine supplement to the radiator and aids in removing heat coolant (antifreeze) or steam from your radiator.
Page 440: Torque Specifications
438 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 111 Ft-Lbs (150 N·m) M14 x 1.50 22 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
Page 441: Tire Service Kit - If Equipped
WHAT TO DO IN EMERGENCIES 439 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. TIRE SERVICE KIT —...
Page 442: Tire Service Kit Storage
440 WHAT TO DO IN EMERGENCIES Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is located in the trunk. Tire Service Kit Components Tire Service Kit Location 1 — Sealant Bottle 5 — Mode Select Knob 2 —...
Page 443: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 441 Using The Mode Select Knob And Hoses Using The Power Button Your Tire Service Kit is equipped with the following Push and release the Power Button (4) once to symbols to indicate the air or sealant mode. turn On the Tire Service Kit.
Page 444 442 WHAT TO DO IN EMERGENCIES from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the Tire Service Kit.
Page 445 WHAT TO DO IN EMERGENCIES 443 WARNING! WARNING! (Continued) • Do not attempt to seal a tire on the side of the • Keep Tire Service Kit away from open flames or vehicle closest to traffic. Pull far enough off the heat source.
Page 446: Sealing A Tire With Tire Service Kit
444 WHAT TO DO IN EMERGENCIES on the ground. This will provide the best positioning WARNING! (Continued) of the kit when injecting the sealant into the deflated • Tire Service Kit Sealant solution contains latex. In tire and running the air pump. Move the vehicle as case of an allergic reaction or rash, consult a phy- necessary to place the valve stem in this position sician immediately.
Page 447 WHAT TO DO IN EMERGENCIES 445 4. Remove the cap from the valve stem and then screw NOTE: Sealant may leak out through the puncture in the the fitting at the end of the Sealant Hose (6) onto the tire. valve stem.
Page 448 446 WHAT TO DO IN EMERGENCIES NOTE: If the Mode Select Knob (5) is on Air Mode and latch pillar (recommended pressure). Check the tire the pump is operating, air will dispense from the Air pressure by looking at the Pressure Gauge (3). Pump Hose (7) only, not the Sealant Hose (6).
Page 449 WHAT TO DO IN EMERGENCIES 447 3. Immediately disconnect the Sealant Hose (6) from the (D) Drive Vehicle: valve stem, reinstall the cap on the fitting at the end of Immediately after injecting sealant and inflating the tire, the hose, and place the Tire Service Kit in the vehicle drive the vehicle 5 miles (8 km) or 10 minutes to ensure storage location.
Page 450 448 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Press the Power Button (4) to turn on Tire Service Kit to Use Tire Service Kit”...
Page 451: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 449 5. Remove the Speed Limit sticker from the instrument 4. Clean any remaining sealant from the Tire Service Kit panel after the tire has been repaired. housing. 6. Replace the Sealant Bottle (1) and Sealant Hose (6) 5.
Page 452: Preparations For Jump-Start
450 WHAT TO DO IN EMERGENCIES pack. Jump-starting can be dangerous if done improperly Preparations For Jump-Start so please follow the procedures in this section carefully. The battery is stored under an access cover in the trunk. Remote battery posts are located on the right side of the NOTE: When using a portable battery booster pack engine compartment for jump-starting.
Page 453: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 451 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. • Take care to avoid the radiator cooling fan when- ever the hood is raised.
Page 454 452 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Failure to follow these procedures could result in Do not connect the jumper cable to the negative (-) damage to the charging system of the booster vehicle post of the discharged battery. The resulting electri- or the discharged vehicle.
Page 455: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 453 6. Once the engine is started, remove the jumper cables CAUTION! in the reverse sequence: Accessories plugged into the vehicle power outlets Disconnecting The Jumper Cables draw power from the vehicle’s battery, even when not 1.
Page 456 454 WHAT TO DO IN EMERGENCIES pressure that will maintain the rocking motion, without CAUTION! spinning the wheels or racing the engine. • When “rocking” a stuck vehicle by shifting be- CAUTION! tween DRIVE / 1ST GEAR and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or Racing the engine or spinning the wheels may lead to drivetrain damage may result.
Page 457: Manual Park Release - 8 Speed Transmission
WHAT TO DO IN EMERGENCIES 455 WARNING! (Continued) WARNING! (Continued) explode and injure someone. Do not spin your vehi- vehicle. Activating the Manual Park Release on an cle’s wheels faster than 30 mph (48 km/h) or for unsecured vehicle could lead to serious injury or longer than 30 seconds continuously without stop- death for those in or around the vehicle.
Page 458 456 WHAT TO DO IN EMERGENCIES Console Storage Bin Locking Tab 3. Using a small screwdriver or similar tool, fish the 5. While holding the locking tab in the disengaged tether strap up through the opening in the console position, pull the tether strap to rotate the lever up and base.
Page 459 WHAT TO DO IN EMERGENCIES 457 2. Rotate the Manual Park Release lever forward and down, to its original position, until the locking tab snaps into place to secure the lever. 3. Pull up gently on the tether strap to confirm that the lever is locked in its stowed position.
Page 460: Towing A Disabled Vehicle
458 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. Towing Condition Wheels OFF The AUTOMATIC MANUAL Ground TRANSMISSION TRANSMISSION Flat Tow NONE If transmission is If transmission is operable: operable:...
Page 461: Automatic Transmission
WHAT TO DO IN EMERGENCIES 459 Proper towing or lifting equipment is required to prevent CAUTION! (Continued) damage to your vehicle. Use only tow bars and other • When securing the vehicle to a flatbed truck, do not equipment designed for this purpose, following equip- attach to front or rear suspension components.
Page 462: Manual Transmission
460 WHAT TO DO IN EMERGENCIES • The towing speed must not exceed 30 mph (48 km/h). Manual Transmission If the transmission is not operable, or the vehicle must The manufacturer recommends towing your vehicle with be towed faster than 30 mph (48 km/h) or farther than 30 all four wheels OFF the ground using a flatbed.
Page 463 WHAT TO DO IN EMERGENCIES 461 CAUTION! Towing this vehicle in violation of the above require- ments can cause severe engine and/or transmission damage. Damage from improper towing is not cov- ered under the New Vehicle Limited Warranty. I n f o r ma t i o n P r o v i d e d b y :...
Page 464 I n f o r ma t i o n P r o v i d e d b y :...
Page 465: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 6.2L ▫ Engine Oil ......471 SUPERCHARGED ..... .465 ▫...
Page 466 464 MAINTAINING YOUR VEHICLE ▫ Brake System ......492 ▫ Low Beam Headlamp, High Beam Headlamp, Park/Turn Lamp — Models with Halogen ▫...
Page 467: Engine Compartment - 6.2L Supercharged
MAINTAINING YOUR VEHICLE 465 ENGINE COMPARTMENT — 6.2L SUPERCHARGED 1 — Remote Jump Start (Positive Battery Post) 7 — Engine Coolant Reservoir 2 — Remote Jump Start (Negative Battery Post) 8 — Air Cleaner Filter 3 — Intercooler Fluid Reservoir 9 —...
Page 468: Engine Compartment - 6.4L (392 Hemi)
466 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.4L (392 HEMI) 1 — Remote Jump Start (Positive Battery Post) 6 — Engine Coolant Pressure Cap 2 — Remote Jump Start (Negative Battery Post) 7— Engine Coolant Reservoir 3 — Engine Oil Dipstick 8 —...
Page 469: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 467 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 470: Emissions Inspection And Maintenance Programs
468 MAINTAINING YOUR VEHICLE turn off the message. If the problem continues, the serviced, recently had a dead battery or a battery replace- message will appear the next time the vehicle is started. ment. If the OBD II system should be determined not ready for the I/M test, your vehicle may fail the test.
Page 471: Replacement Parts
MAINTAINING YOUR VEHICLE 469 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced •...
Page 472: Maintenance Procedures
470 MAINTAINING YOUR VEHICLE available which include detailed service information for MAINTENANCE PROCEDURES your vehicle. Refer to these Service Manuals before The pages that follow contain the required maintenance attempting any procedure yourself. services determined by the engineers who designed your vehicle.
Page 473: Engine Oil
MAINTAINING YOUR VEHICLE 471 regular intervals, such as every fuel stop. The best time to CAUTION! (Continued) check the engine oil level is about five minutes after a • Your vehicle has been built with improved fluids fully warmed engine is shut off. that protect the performance and durability of your Checking the oil while the vehicle is on level ground will vehicle and also allow extended maintenance inter-...
Page 474 472 MAINTAINING YOUR VEHICLE NOTE: Under no circumstances should oil change in- CAUTION! tervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first. Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is Engine Oil Selection not covered by the New Vehicle Limited Warranty.
Page 475 MAINTAINING YOUR VEHICLE 473 Synthetic Engine Oils Your 6.2L Supercharged engine (if equipped) has a unique engine oil system. The system contains a drain in You may use synthetic engine oils provided the recom- the engine oil pan and the engine oil cooler. It is neces- mended oil quality requirements are met, and the recom- sary for the service technician to drain both the engine oil mended maintenance intervals for oil and filter changes...
Page 476 474 MAINTAINING YOUR VEHICLE available which include detailed service information for To do this you will need follow the procedure below: your vehicle. Refer to these Service Manuals before 1. Remove the four nuts with the Shaker tool located in attempting any procedure yourself.
Page 477: Engine Oil Filter
MAINTAINING YOUR VEHICLE 475 Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter The air induction system (air cleaner, hoses, etc.) can at every engine oil change. provide a measure of protection in the case of engine Engine Oil Filter Selection backfire.
Page 478: Maintenance-Free Battery
476 MAINTAINING YOUR VEHICLE Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required. NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting.
Page 479: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 477 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can burn • It is essential when replacing the cables on the or even blind you. Do not allow battery fluid to battery that the positive cable is attached to the contact your eyes, skin, or clothing.
Page 480 478 MAINTAINING YOUR VEHICLE of the condenser fins and a performance test. Drive belt CAUTION! tension should also be checked at this time. Do not use chemical flushes in your air conditioning WARNING! system as the chemicals can damage your air condi- tioning components.
Page 481 MAINTAINING YOUR VEHICLE 479 Refrigerant Recovery And Recycling HFO 1234yf 1. Remove the access door in the cowl screen by pressing — If Equipped the retaining clips. HFO 1234yf Air Conditioning Refrigerant is a hydro- fluorocarbon (HFC) that is endorsed by the Environmen- tal Protection Agency and is an ozone-saving product with a low GWP (Global Warming Potential).
Page 482 480 MAINTAINING YOUR VEHICLE Filter Access Cover A/C Air Filter 3. Remove the used filter. 5. Close the filter access cover. 4. Install the new filter with arrows pointing in the Refer to the “Maintenance Schedule” for the proper direction of airflow, which is toward the rear of the maintenance intervals.
Page 483: Body Lubrication
MAINTAINING YOUR VEHICLE 481 Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as Clean the rubber edges of the wiper blades and the seat tracks, door hinge pivot points and rollers, liftgate, windshield periodically with a sponge or soft cloth and a tailgate, decklid, sliding doors and hood hinges, should mild nonabrasive cleaner.
Page 484: Adding Washer Fluid
482 MAINTAINING YOUR VEHICLE The fluid reservoir will hold nearly 1 gal (4 l) of washer Adding Washer Fluid fluid when the message “Low Washer Fluid” appears in The windshield washer fluid reservoir is located in the the Driver’s Information Display (DID). front of the engine compartment.
Page 485 MAINTAINING YOUR VEHICLE 483 have an authorized technician inspect the complete ex- WARNING! (Continued) haust system and adjacent body areas for broken, dam- • A hot exhaust system can start a fire if you park aged, deteriorated, or mispositioned parts. Open seams over materials that can burn.
Page 486 484 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control CAUTION! (Continued) systems can result in civil penalties being assessed • Damage to the catalytic converter can result if your against you. vehicle is not kept in proper operating condition. In unusual situations involving grossly malfunctioning In the event of engine malfunction, particularly engine operation, a scorching odor may suggest severe...
Page 487: Cooling System
MAINTAINING YOUR VEHICLE 485 • Do not idle the engine with any spark plug wires Cooling System disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough WARNING! idle or malfunctioning operating conditions. • When working near the radiator cooling fan, NOTE: Your vehicles exhaust system may be equipped disconnect the fan motor lead or place the ignition with an Electronic Exhaust Valve (EEV) system, if the...
Page 488 486 MAINTAINING YOUR VEHICLE Coolant Checks coolant from the radiator drain cock. If the cap is sealing properly, the engine coolant (antifreeze) will begin to Check the engine coolant (antifreeze) protection every 12 drain from the coolant recovery bottle. DO NOT RE- months (before the onset of freezing weather, where MOVE THE COOLANT PRESSURE CAP WHEN THE applicable).
Page 489 MAINTAINING YOUR VEHICLE 487 NOTE: If equipped with the 6.2L Supercharged engine CAUTION! the intercooler must be vacuum flushed and filled. If any coolant is needed to be added to the system please • Mixing of engine coolant (antifreeze) other than contact your local authorized dealer.
Page 490 488 MAINTAINING YOUR VEHICLE you use the same engine coolant (OAT coolant conform- CAUTION! (Continued) ing to MS-12106) throughout the life of your vehicle. • Do not use water alone or alcohol-based engine Please review these recommendations for using Organic coolant (antifreeze) products.
Page 491 MAINTAINING YOUR VEHICLE 489 (antifreeze) solution. The use of lower quality water have a authorized dealer drain, flush, and refill with will reduce the amount of corrosion protection in the OAT coolant (conforming to MS-12106) as soon as engine cooling system. possible.
Page 492 490 MAINTAINING YOUR VEHICLE engine coolant in open containers or allow it to remain in WARNING! puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground • Do not open hot engine cooling system. Never add spills immediately.
Page 493 MAINTAINING YOUR VEHICLE 491 When additional coolant is needed to maintain the • Check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine coolant (antifreeze) proper level, it should be added to the coolant bottle. Do needs to be added, the contents of the coolant expansion not overfill.
Page 494: Brake System
492 MAINTAINING YOUR VEHICLE • Do not change the thermostat for Summer or Winter WARNING! (Continued) operation. If replacement is ever necessary, install high brake temperatures, excessive lining wear, and ONLY the correct type thermostat. Other designs may possible brake damage. You would not have your full result in unsatisfactory engine coolant (antifreeze) braking capacity in an emergency.
Page 495 MAINTAINING YOUR VEHICLE 493 Add enough fluid to bring the level up to the require- WARNING! ments described on the brake fluid reservoir. With disc brakes, fluid level can be expected to fall as the brake • Use only manufacturer’s recommended brake pads wear.
Page 496: Clutch Hydraulic System (Manual Transmission)
494 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contaminate moisture, use only new brake fluid or fluid that has the brake fluid. Brake seal components could be been in a tightly closed container.
Page 497: Manual Transmission - If Equipped
MAINTAINING YOUR VEHICLE 495 Manual Transmission — If Equipped Automatic Transmission — If Equipped Fluid Level Check Selection Of Lubricant Check the fluid level by removing the fill plug on the left It is important to use the proper transmission fluid to side of the transmission.
Page 498 496 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Using a transmission fluid other than the manufac- Do not use chemical flushes in your transmission as turer’s recommended fluid may cause deterioration the chemicals can damage your transmission compo- in transmission shift quality and/or torque converter nents.
Page 499: Rear Axle
MAINTAINING YOUR VEHICLE 497 with an improper fluid level can cause severe transmis- Rear Axle sion damage. Fluid Level Check Checking the fluid level while the vehicle is on level CAUTION! ground will improve the accuracy of the fluid level If a transmission fluid leak occurs, visit your autho- reading.
Page 500: Appearance Care And Protection From Corrosion
498 MAINTAINING YOUR VEHICLE What Causes Corrosion? Appearance Care And Protection From Corrosion Corrosion is the result of deterioration or removal of Protection Of Body And Paint From Corrosion paint and protective coatings from your vehicle. Vehicle body care requirements vary according to geo- graphic locations and usage.
Page 501 MAINTAINING YOUR VEHICLE 499 • If insects, tar, or other similar deposits have accumu- Special Care lated on your vehicle, use MOPAR® Super Kleen Bug • If you drive on salted or dusty roads or if you drive and Tar Remover to remove. near the ocean, hose off the undercarriage at least once a month.
Page 502 500 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, NOTE: If your vehicle is equipped with Dark Vapor or de-icer salt, etc., be sure that such materials are well Black Satin Chrome wheels DO NOT USE wheel cleaners, packaged and sealed.
Page 503 MAINTAINING YOUR VEHICLE 501 Stain Repel Fabric Cleaning Procedure — If • Do not use any harsh solvents or any other form of Equipped protectants on Stain Repel products. Stain Repel seats may be cleaned in the following man- Interior Care ner: Use MOPAR®...
Page 504 502 MAINTAINING YOUR VEHICLE and MOPAR® Total Clean or equivalent. Care should be To minimize the possibility of scratching the lenses and taken to avoid soaking your leather upholstery with any reducing light output, avoid wiping with a dry cloth. To liquid.
Page 505 MAINTAINING YOUR VEHICLE 503 When cleaning the rear view mirror, spray cleaner on the If the belts need cleaning, use MOPAR® Total Clean, a towel or rag that you are using. Do not spray cleaner mild soap solution, or lukewarm water. Do not remove directly on the mirror.
Page 506: Fuses
504 MAINTAINING YOUR VEHICLE Cleaning The Center Console Cupholders WARNING! (Continued) Clean with a damp cloth or towel using a mild detergent • Before replacing a fuse, make sure that the ignition with the cupholder in the center console. is off and that all the other services are switched off and/or disengaged.
Page 507: Front Power Distribution Center (Fuses)
MAINTAINING YOUR VEHICLE 505 Front Power Distribution Center (Fuses) CAUTION! The Front Power Distribution Center is located in the • When installing the power distribution center engine compartment. This module contains fuses and cover, it is important to ensure the cover is properly relays.
Page 508 506 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare 40 Amp Green – Radiator Fan #1 – If Equipped 50 Amp Red – Power Steering #1 / Radiator Fan (6.2L Supercharged) – If Equipped 30 Amp Pink –...
Page 509 MAINTAINING YOUR VEHICLE 507 Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare – 20 Amp Yellow Left HID – If Equipped – 20 Amp Yellow Right HID – If Equipped 40 Amp Green – Radiator Fan #2 – If Equipped 50 Amp Red –...
Page 510 508 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 15 Amp Blue Electronic Shift Module (LA) / Transmis- sion Control Module (LA/LD) – – Fuse – Spare – 25 Amp Clear Engine Module – – Fuse – Spare – –...
Page 511 MAINTAINING YOUR VEHICLE 509 Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare – – Fuse – Spare – 20 Amp Yellow Vacuum Pump – 10 Amp Red Driver Assistance Systems Module (LD/LX) – – Fuse – Spare I n f o r ma t i o n P r o v i d e d b y :...
Page 512: Rear Power Distribution Center (Fuses)
510 MAINTAINING YOUR VEHICLE Rear Power Distribution Center (Fuses) CAUTION! There is also a power distribution center located in the • When installing the power distribution center trunk under the spare tire access panel. This center cover, it is important to ensure the cover is properly contains fuses and relays.
Page 513 MAINTAINING YOUR VEHICLE 511 Cavity Cartridge Fuse Mini-Fuse Description 60 Amp Yellow — Front PDC Feed #1 — — Fuse – Spare 60 Amp Yellow — Front PDC Feed #2 30 Amp Pink — Sunroof / Dome Lamp – Police 40 Amp Green —...
Page 514 512 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green — HVAC Blower 20 Amp Blue — Left Spot Lamp – Police — — Fuse – Spare 30 Amp Pink — Mod Network Interface – Police — — Fuse —...
Page 515 MAINTAINING YOUR VEHICLE 513 Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Tire Pressure Monitor — 15 Amp Blue – LD/LX Transmission / Electronic 25 Amp Clear – LA Shift Module (LD/LX) 30 Amp Green – LA 6.2L Fuel Pump (LA) Supercharged Fuel Pump (LA 6.2L Su- percharged)
Page 516 514 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description — 5 Amp Tan Battery Sensor — 15 Amp Blue Electronic Exhaust Valve – If Equipped — 20 Amp Yellow Radio — 10 Amp Red – LD/LX Dual USB Port (LD/LX) 20 Amp Yellow –...
Page 517 MAINTAINING YOUR VEHICLE 515 Cavity Cartridge Fuse Mini-Fuse Description — 15 Amp Blue Cluster / Rearview Mir- ror / Compass(LDLX)/ Humidity Sensor — — Fuse — Spare — 10 Amp Red Adaptive Front Lighting / Auto High BEAM / Day Time Running Lamps- If Equipped —...
Page 518 516 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red HVAC Module/In Car Temperature Sensor — 10 Amp Red Airbag Module (LA) — — Fuse — Spare — — Fuse — Spare — — Fuse — Spare —...
Page 519: Vehicle Storage
MAINTAINING YOUR VEHICLE 517 Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Airbag Module — — Fuse — Spare — 10 Amp Red Rain and Light Sensor/ Sunroof — 10 Amp Red Dual USB Power Outlet – R/A Sense (LD/LX) Rear Sunshade (LD/LX) —...
Page 520: Replacement Bulbs
518 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. Interior Bulbs Bulb Number Rear Courtesy/Reading Lamps Rear Compartment (Trunk) Lamp Overhead Console Reading Lamps Visor Vanity Lamps A6220...
Page 521 MAINTAINING YOUR VEHICLE 519 Exterior Bulbs Bulb Number Headlamp – High Intensity Discharge (HID) D3S (Serviced at Authorized Dealer) * Halogen Headlamp HIR2LL Front Park/Turn Lamp LED (Serviced at Authorized Dealer) Front Fog Lamp H11LL (Serviced at Authorized Dealer) Front Side Marker LED (Serviced at Authorized Dealer) Tail Lamp LED (Serviced at Authorized Dealer)
Page 522: Bulb Replacement
520 MAINTAINING YOUR VEHICLE 4. Turn the headlamp access cap counterclockwise to BULB REPLACEMENT remove. NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric 5. Remove bulb by turning it counter clockwise and conditions change to allow the condensation to change disconnect.
Page 523: Low Beam Headlamp, High Beam Headlamp, And Park/Turn Lamp - Models With High Intensity
MAINTAINING YOUR VEHICLE 521 3. Remove one fastener on the lower air box to remove Low Beam Headlamp, High Beam Headlamp, and and access the rear of the headlamp assembly. Park/Turn Lamp — Models with High Intensity Discharge (HID) Headlamps — If Equipped 4.
Page 524: Front/Rear Side Marker Lamp
522 MAINTAINING YOUR VEHICLE NOTE: On vehicles equipped with HID headlamps, Center Tail/Backup Lamp when the headlamps are turned on, there is a blue hue to The Center Tail/Backup Lamp use LED lamps that are the lamps. This diminishes and becomes more white after not serviceable separately.
Page 525: Fluid Capacities
MAINTAINING YOUR VEHICLE 523 FLUID CAPACITIES U.S. Metric 18.5 Gallons 70 Liters Fuel (Approximate) Engine Oil With Filter 6.2 Liter Supercharged Engine (SAE 0W-40, Synthetic API Certified) 6 Quarts 5.68 Liters 6.4 Liter Engine (SAE 0W-40, Synthetic API Certified) 7 Quarts 6.6 Liters Cooling System * 6.2 Liter Supercharged Engine (MOPAR®...
Page 526: Fluids, Lubricants And Genuine Parts
524 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine/Intercooler 6.2L Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS-12106. Engine 6.4L Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS-12106.
Page 527 MAINTAINING YOUR VEHICLE 525 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 528: Chassis
526 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – We recommend you use MOPAR® ATF+4® Automatic Transmission If Equipped Fluid. Automatic Transmission – Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, If Equipped or equivalent.
Page 529: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ... . .528 ▫ Maintenance Chart ....530 I n f o r ma t i o n P r o v i d e d b y :...
Page 530 528 MAINTENANCE SCHEDULES Based on engine operation conditions, the oil change MAINTENANCE SCHEDULE indicator message will illuminate. This means that ser- The Scheduled Maintenance services listed in this vice is required for your vehicle. Have your vehicle manual must be done at the times or mileages specified serviced as soon as possible, within the next 500 miles to protect your vehicle warranty and ensure the best (805 km).
Page 531 MAINTENANCE SCHEDULES 529 Your authorized dealer will reset the oil change indicator • Inspect the battery, and clean and tighten the terminals message after completing the scheduled oil change. If a as required. scheduled oil change is performed by someone other •...
Page 532: Maintenance Chart
530 MAINTENANCE SCHEDULES Maintenance Chart Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of ir- regular wear, even if it occurs before scheduled mainte-...
Page 533 MAINTENANCE SCHEDULES 531 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: If using your vehicle for any of the follow- ing: dusty or off-road conditions. Inspect the engine air cleaner fil- ter; replace if neces- sary.
Page 534 532 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Inspect the CV joints. Inspect the exhaust system. Adjust the parking brake on vehicles equipped with four wheel disc brakes. Change the manual transmis- sion fluid (if equipped).
Page 535 MAINTENANCE SCHEDULES 533 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Inspect the manual transmis- sion fluid (if equipped), add as necessary. Change the rear axle fluid if using your vehicle for any of the follow- ing: police, taxi, fleet or frequent...
Page 536 534 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Inspect the rear axle fluid. Inspect front sus- pension, tie rod ends, and boot seals, for cracks or leaks and all parts for damage, wear, im- proper looseness...
Page 537 MAINTENANCE SCHEDULES 535 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Replace the engine air cleaner filter. Replace the air condi- tioning filter. Inspect and replace the PCV Valve if necessary Replace the spark plugs –...
Page 538 536 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Kilometers: Replace the spark plugs – 6.4L En- gine ** Flush and replace the engine coolant at 120 months if not done at 150,000 miles (240,000 km).
Page 539 MAINTENANCE SCHEDULES 537 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 540 538 MAINTENANCE SCHEDULES 6.2L SUPERCHARGED AND 6.4L MAINTENANCE RECORD Odometer Date Signature, Authorized Service Center 6,000 Miles (10,000 km) or 6 Months 12,000 Miles (20,000 km) or 12 Months 18,000 Miles (30,000 km) or 18 Months 24,000 Miles (40,000 km) or 24 Months 30,000 Miles (50,000 km) or...
Page 541 MAINTENANCE SCHEDULES 539 Odometer Date Signature, Authorized Service Center 36,000 Miles (60,000 km) or 36 Months 42,000 Miles (70,000 km) or 42 Months 48,000 Miles (80,000 km) or 48 Months 54,000 Miles (90,000 km) or 54 Months 60,000 Miles (100,000 km) or 60 Months I n f o r ma t i o n P r o v i d e d b y :...
Page 542 540 MAINTENANCE SCHEDULES Odometer Date Signature, Authorized Service Center 66,000 Miles (110,000 km) or 66 Months 72,000 Miles (120,000 km) or 72 Months 78,000 Miles (130,000 km) or 78 Months I n f o r ma t i o n P r o v i d e d b y :...
Page 543: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS SUGGESTIONS FOR OBTAINING SERVICE FOR ▫ Customer Assistance For The Hearing Or Speech YOUR VEHICLE ..... . .543 Impaired (TDD/TTY).
Page 544 542 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM ▫ Traction Grades ..... . .549 TIRE QUALITY GRADES ....549 ▫...
Page 545: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 543 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 546: Chrysler Group Llc Customer Center
544 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer service manager first.
Page 547: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 545 Canadian residents with hearing difficulties that require In Mexico Contact: assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 548: Warranty Information
546 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust (internal combustion engines only), manufacturer’s service contract.
Page 549: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 547 campaign. However, NHTSA cannot become involved in MOPAR® PARTS individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 550: Publication Order Forms
548 IF YOU NEED CONSUMER ASSISTANCE Diagnostic Procedure Manuals PUBLICATION ORDER FORMS To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 551 IF YOU NEED CONSUMER ASSISTANCE 549 Call toll free at: Treadwear The Treadwear grade is a comparative rating, based on • 1–800–890–4038 (U.S.) the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 552 550 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 553 INDEX I n f o r ma t i o n P r o v i d e d b y :...
Page 554 552 INDEX About Your Brakes ......378 Transporting Pets ......89 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 555 INDEX 553 Antifreeze (Engine Coolant) ....487 Automatic Transmission Limp Home Mode ..356 Disposal ......490 Autostick .
Page 556 554 INDEX Master Cylinder ......492 Certification Label......428 Parking .
Page 557 INDEX 555 Seating Positions ......75 Pressure Cap ......489 Using The Top Tether Anchorage .
Page 558 556 INDEX Dimmer Switch, Headlight....139 Driving Dipsticks Through Flowing, Rising, or Shallow Standing Oil (Engine) ......471 Water .
Page 559 INDEX 557 Emission Control System Maintenance ..468 Overheating ......436 Engine .
Page 560 558 INDEX Engine Oil Disposal .....474 Fuel ........421 Flashers Adding .
Page 561 INDEX 559 Gas Cap (Fuel Filler Cap) ....425 Hazard Gasoline, Clean Air ......421 Driving Through Flowing, Rising, or Shallow Stand- Gasoline (Fuel) .
Page 562 560 INDEX Heater, Engine Block ..... . .342 Introduction ......4 High Beam/Low Beam Select (Dimmer) Switch .
Page 563 INDEX 561 Unlock From The Driver’s Side ....21 Alarm .......222 Unlock From The Passenger Side .
Page 564 562 INDEX High Beam/Low Beam Select ....139 Vanity Mirror ......111 Illuminated Entry .
Page 565 INDEX 563 Manual, Service ......548 Multi-Function Control Lever ....138 Manual Transmission .
Page 566 564 INDEX Onboard Diagnostic System ....467 Distribution Center (Fuses) ....510 Operating Precautions .
Page 567 INDEX 565 Rain Sensitive Wiper System ....145 Lock The Doors ......22 Rear Camera .
Page 568 566 INDEX Restraints, Child ......68 Pregnant Women ......49 Restraints, Occupant .
Page 569 INDEX 567 Adjustment ......121 Service Engine Soon Light (Malfunction Indicator) . .221 Head Restraints ......128 Service Manuals .
Page 570 568 INDEX Starting ....... . .26 Sunglasses Storage ......193 Automatic Transmission .
Page 571 INDEX 569 High Speed ......405 Disabled Vehicle ......458 Inflation Pressures .
Page 572 570 INDEX Trunk Release Remote Control ....38 Vehicle Loading ......399 Turn Signals .
Page 573 INDEX 571 Window Fogging ......313 Windows ....... .36 Power .
Page 574 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 575: Chrysler Group Llc
Chrysler Group LLC 15D492-126-AB Second Edition Rev 1 Printed in U.S.A. I n f o r ma t i o n P r o v i d e d b y :...

This manual is also suitable for:

Challenger srt 392 2015 Challenger srt 392 Challenger srt hellcat

Dodge Challenger SRT Hellcat 2015 Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

A Word about Your Keys

Sentry Key

Vehicle Security Alarm

Illuminated Entry

Remote Keyless Entry (Rke)

Occupant Restraint Systems

Srt Engine Break-In Recommendations

Safety Tips

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge Challenger SRT Hellcat 2015

Summary of Contents for Dodge Challenger SRT Hellcat 2015