Overtake Aid - Dodge 2015 Charger SRT 392 Operating Instructions Manual

To increase the distance setting, push the Dis-
tance Setting — Increase button and release.
Each time the button is pushed, the distance
setting increases by one bar (longer).
To decrease the distance setting, push the
Distance Setting — Decrease button and re-
lease. Each time the button is pushed, the
distance setting decreases by one bar (shorter).
If there is no vehicle ahead, the vehicle will
maintain the set speed. If a slower moving
vehicle is detected in the same lane, the DID
displays the "Sensed Vehicle Indicator" icon,
and the system adjusts vehicle speed automati-
cally to maintain the distance setting, regard-
less of the set speed.
The vehicle will then maintain the set distance
until:
• The vehicle ahead accelerates to a speed
above the set speed.
• The vehicle ahead moves out of your lane or
view of the sensor.
• The distance setting is changed.
102
• The system disengages. (Refer to the infor-
mation on ACC Activation).
The maximum braking applied by ACC is lim-
ited; however, the driver can always apply the
brakes manually, if necessary.
NOTE:
The brake lights will illuminate whenever the
ACC system applies the brakes.
A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this
occurs, a visual alert "BRAKE" will flash in the
DID and a chime will sound while ACC contin-
ues to apply its maximum braking capacity.
Brake Alert
NOTE:
The "Brake!" Screen in the DID is a warning
for the driver to take action and does not
necessarily mean that the Forward Collision
Warning system is applying the brakes au-
tonomously.

Overtake Aid

When driving with ACC engaged and following
a vehicle, the system will provide an additional
acceleration up to the ACC set speed to assist
in passing the vehicle. In locations with left hand
drive traffic, an additional acceleration is trig-
gered when the driver utilizes the left turn signal
and will only be active when passing on the left
hand side. In locations with right hand drive
traffic, an additional acceleration is triggered
when the driver utilizes the right turn signal and
will only be active when passing on the right
hand side.