Parking Brake
When the parking brake is applied with the
ignition switch in the ON position, the "Brake
Warning Light" in the instrument cluster will
illuminate.
NOTE:
• When the parking brake is applied and the
transmission is placed in gear, the "Brake
Warning Light" will flash. If vehicle speed
is detected, a chime will sound to alert the
driver. Fully release the parking brake
before attempting to move the vehicle.
218
• This light only shows that the parking
brake is applied. It does not show the
degree of brake application.
When parking on a hill, it is important to turn the
front wheels toward the curb on a downhill
grade and away from the curb on an uphill
grade. Apply the parking brake before placing
the shift lever/gear selector in PARK, otherwise
the load on the transmission locking mecha-
nism may make it difficult to move the shift
lever/gear selector out of PARK. The parking
brake should always be applied whenever the
driver is not in the vehicle.
WARNING!
• Never use the PARK position as a substi-
tute for the parking brake. Always apply
the parking brake fully when parked to
guard against vehicle movement and pos-
sible injury or damage.
• When leaving the vehicle, always remove
the Key Fob from the ignition and lock your
vehicle.
WARNING! (Continued)
• Never leave children alone in a vehicle, or
with access to an unlocked vehicle. Allow-
ing children to be in a vehicle unattended
is dangerous for a number of reasons. A
child or others could be seriously or fatally
injured. Children should be warned not to
touch the parking brake, brake pedal or the
shift lever/gear selector.
• Do not leave the Key Fob in or near the
vehicle (or in a location accessible to chil-
dren), and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-
Go™ in the ACC or ON/RUN mode. A child
could operate power windows, other con-
trols, or move the vehicle.
• Be sure the parking brake is fully disen-
gaged before driving; failure to do so can
lead to brake failure and a collision.
(Continued)
(Continued)