Climate Control Functions; A/C (Air Conditioning); Recirculation Control - Dodge 2015 Charger SRT 392 Operating Instructions Manual

12. Climate Control OFF Button
Press and release this button to turn the Cli-
mate Control ON/OFF.
13. Driver Temperature Control Down But-
ton (Uconnect® 8.4 Only)
Provides the driver with independent tempera-
ture control. Push the button on the faceplate
for cooler temperature settings or on the touch-
screen, press and slide the temperature bar
button towards the blue arrow for cooler tem-
perature settings.
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.
14. Driver Temperature Control Up Button
(Uconnect® 8.4 Only)
Provides the driver with independent tempera-
ture control. Push the button on the faceplate
for warmer temperature settings or on the
touchscreen, press and slide the temperature
bar button towards the red arrow for warmer
temperature settings.
NOTE:
In Sync mode, this button will also automati-
cally adjust the passenger temperature set-
ting at the same time.

Climate Control Functions

A/C (Air Conditioning)

The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate the
air conditioning system. When the air condition-
ing system is turned on, cool dehumidified air
will flow through the outlets into the cabin. For
improved fuel economy, press the A/C button to
turn off the air conditioning and manually adjust
the blower and airflow mode settings. Also,
make sure to select only Panel, Bi-Level or
Floor modes.
NOTE:
• If fog or mist appears on the windshield or
side glass, select Defrost mode and in-
crease blower speed if needed.
• If your air conditioning performance
seems lower than expected, check the
front of the A/C condenser (located in
front of the radiator), for an accumulation
of dirt or insects. Clean with a gentle
water spray from the front of the radiator
and through the condenser.
MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C
and the prior settings. The button illuminates
when MAX A/C is ON.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Press-
ing other settings will cause the MAX A/C
operation to switch to the selected setting and
MAX A/C to exit.

Recirculation Control

When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
185