Acc Operation At Stop; Adaptive Cruise Control (Acc) Menu - Dodge 2015 Charger SRT 392 Operating Instructions Manual

NOTE:
When the vehicle transitions from a location
with left hand drive traffic to a location with
right hand drive traffic or vice-versa, the
ACC system will automatically detect the
direction of traffic.

ACC Operation At Stop

If the ACC system brings your vehicle to a
standstill while following a target vehicle, if the
target vehicle starts moving within two seconds
of your vehicle coming to a standstill, your
vehicle will resume motion without the need for
any driver action.
If the target vehicle does not start moving within
two seconds of your vehicle coming to a stand-
still, the ACC with Stop system will cancel and
the brakes will release. A cancel message will
display on the DID and produce a warning
chime. Driver intervention will be required at this
moment.
While ACC with Stop is holding your vehicle at a
standstill, if the driver seatbelt is unbuckled or
the driver door is opened, the ACC with Stop
system will cancel and the brakes will release. A
cancel message will display on the DID and
produce a warning chime. Driver intervention
will be required at this moment.
WARNING!
When the ACC system is resumed, the driver
must ensure that there are no pedestrians,
vehicles or objects in the path of the vehicle.
Failure to follow these warnings can result in
a collision and death or serious personal
injury.

Adaptive Cruise Control (ACC) Menu

The DID displays the current ACC system set-
tings. The DID is located in the center of the
instrument cluster. The information it displays
depends on ACC system status.
Push the ADAPTIVE CRUISE CONTROL
(ACC) ON/OFF button (located on the steering
wheel) until one of the following displays in the
DID:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push the SET + or the SET- button (located on
the steering wheel) and the following will display
in the DID:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
103