Dodge 2015 Charger SRT 392 Operating Instructions Manual page 54

WARNING!
• Improper installation of a child restraint to
the LATCH anchorages can lead to failure
of the restraint. The child could be badly
injured or killed. Follow the child restraint
manufacturer's directions exactly when in-
stalling an infant or child restraint.
• Child restraint anchorages are designed to
withstand only those loads imposed by
correctly-fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the ve-
hicle.
What is the weight limit (child's weight + weight
of the child restraint) for using the Tether Anchor
with the seat belt to attach a forward facing child
restraint?
Installing Child Restraints Using The
Vehicle Seat Belt
The seat belts in the passenger seating posi-
tions are equipped with a Switchable Automatic
Locking Retractor (ALR) that is designed to
keep the lap portion of the seat belt tight around
the child restraint so that it is not necessary to
use a locking clip. The ALR retractor can be
"switched" into a locked mode by pulling all of
the webbing out of the retractor and then letting
the webbing retract back into the retractor. If it is
locked, the ALR will make a clicking noise while
the webbing is pulled back into the retractor.
Refer to the "Automatic Locking Mode" descrip-
tion under "Occupant Restraints" for additional
information on ALR.
Weight limit of the Child Restraint
Lap/Shoulder Belt Systems for Installing
Child Restraints in this Vehicle
• ALR = Switchable Automatic Locking Retrac-
tor
•
Top Tether Anchorage Symbol
Always use the tether anchor when using the
seat belt to install a forward facing child re-
straint, up to the recommended weight limit of
the child restraint.
51