Letter Fold-Out Position Adjustment - Konica Minolta BizHub Pro 1050 User Manual

03 Letter Fold-out Position Adjustment

Perform this adjustment for the folding positions in Letter Fold-out mode processed
by the FD-501 Folding Unit.
The baseline of Single Fold is calculated from the edge of the sheet, while that
of Double Fold is calculated from the position of the first fold line, therefore a
distance (b) in step 5 will be altered by changing the position of either Single
Fold or Double Fold.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 03 Multi Folder (Fold) Adj.
2 Touch 03 Letter Fold-out Pos. Adjustment to display the Letter Fold-out
Position Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Letter Fold-out,
then press [Start]. A sample pattern (No. 16) will be output.
2-30
03 Multi Folder (Fold) Adjustment (continued)