Print Tab - Konica Minolta BizHub Pro 1050 User Manual

Print Tab

The [Print] tab is used to configure the image controller.
Interface
This screen appears when you click [Interface] on the [Print] tab. The screen is used
to set information concerning the interface timeout.
• Parallel Timeout: Set parallel port timeout (10-300 seconds).
• Network Timeout: Set receive network timeout (10-300 seconds).
• [Apply] button: Click the button to apply the new settings.
• [Clear] button: Click the button to clear the settings that were entered.
Port Settings
This screen appears when you click [Port Settings] on the [Print] tab. You can use
the screen to see the list of port settings.
• RAW port number
List the RAW port numbers 1 to 6 that are set in [TCP/IP] on the [Network] tab.
• Status
Show enable or disable of each RAW port.
6-12
Administrator Mode (continued)