Section Management Setting - Konica Minolta BizHub Pro 1050 User Manual

02 Section Management Setting

Use this function to set Copy/Printer or Scanner jobs managed by the section, and
select the machine condition in which the machine stops due to reaching the copy
limit.
• If Copy/Printer or Scanner is set to Off when Section Authentication is set
to On on the Authentication Method Setting Screen, the section password
is not required to enter for authentication. In this case, job count and copy
limit count will be suspended.
• When Immediately of Limit Reached Stop Setting is selected, the job is
immediately suspended as soon as the copy limit is reached. In this case,
copying conditions, output data, and scanned data will not be hold. In order
to continue the job with the same section password, change the number of
the copy limit which is set to the section password or reset counting.
When After Print is selected, the machine stops after completing the job as reaching
the copy limit. The message "Copy limit reached" is displayed, and the machine
stops its operation.
When Warning Only is selected, the message "Copy limit reached" is displayed as
reaching the copy limit, and the next job can be continuously executed.
01 Authentication Method (continued)
5-25