Recommended Setting of Paper Type/Weight
It is recommended that paper type/weight should be registered for each paper to be
used, so that the setting change can be made according to the environment
(temperature, humidity, paper condition, etc.) on the basis of registered settings for
each tray.
Recommended Setting Procedure
(1) Register the paper type/weight according to the paper type to be used.
(2) Specify the paper size, registered condition, and whether to use the air assist
function for each tray.
(3) Make setting change on the paper type/weight for each tray, as required,
according to the environment and paper condition.
(4) If the changes made are considered to be a new standard, make change in
registration or make it a new registration.
• Service representative can make adjustments for all trays at the same time.
Contact your service representative, if desired.
• Refer to a label on a paper package when registering the paper conditions.
1-6
Paper Setting Outlines (continued)