Konica Minolta BizHub Pro 1050 User Manual page 174

Procedure
1 Touch 04 Network Setting - 02 Controller NIC Setting - 01 TCP/IP.
2 For each item, select or enter a required value. Use Previous or Next as
required.
(1) TCP/IP
Select Enable or Disable.
(2) DHCP
Select Enable or Disable.
(3) IP Address
Touch IP Address to display an address input screen. After entering in the
field, touch OK.
(4) Subnet Mask
Touch Subnet Mask to display an address input screen. After entering in the
field, touch OK.
(5) Default Gateway
Touch Default Gateway to display an address input screen. After entering in
the field, touch OK.
(6) DNS Server 1 to 3
Touch an appropriate key to display an address input screen. After entering
in the field, touch OK.
(7) DNS Host Name
Touch DNS Host Name to display the input screen. After entering in the field,
touch OK.
(8) DNS Domain Name
Touch DNS Domain Name to display the input screen. After entering in the
field, touch OK.
(9) LDP
Select Enable or Disable.
(10) Network Speed
Select an appropriate key.
(11) TCP/IP RAW port settings
Touch an appropriate RAW port number to display a touch panel keypad
input screen. After entering in the field, touch OK.
To specify to use individual ports or not, select Use or Not Use to the right of
each RAW port key.
5-46
02 Controller NIC Setting (continued)