Snmp - Konica Minolta BizHub Pro 1050 User Manual

05 SNMP

Specify the SNMP settings.
Procedure
1 Touch 04 Network Setting - 02 Controller NIC Setting - 05 SNMP.
2 For each item, select or enter a required value.
(1) SNMP
Select to use SNMP.
(2) Read Community Name
Touch Read Community Name to display an input screen. After entering in
the field, touch OK.
(3) Write Community Name
Touch Write Community Name to display an input screen. After entering in
the field, touch OK.
3 Touch OK to complete the settings and return to the Controller NIC Setting Menu
Screen.
4 Touch Return to specify other settings, or touch Exit to finish setting.
5 After you have changed the settings, turn off the auxiliary power, then turn off and
on the main power.
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval in
between, the machine may not run correctly.
5-54
02 Controller NIC Setting (continued)