Fns Adjustment (Fs-114 Only); Fold & Stitch Position Adjustment (Sk-114) - Konica Minolta 7145 Service Manual

36 MODE
6. Check the positions of the alignment plate and
the paper from the paper exit side.
7. When irregularity still recurs, press the # button
while pressing the
8. "FNS matching
screen"
Enter an adjusting value from the numeric keys,
then press the [SET] key.
• Setting range: -10 ~ +10
1 step = 0.2mm
9. To adjustment of another paper size, select it
from the arrow keys, then repeat steps 4 to 7.
10. Press the [RETURN] key to return to the "FNS
adjustment menu screen".
8.17 FNS adjustment
(FS-114 only)
Perform each finisher adjustment.
8.17.1 Fold & Stitch position adjustment
(SK-114)
Adjust the fold & stitch position of the saddle kit.
It is adjusted when the stapling unit 1 or 2 is
replaced, when the staple position is not correct,
and when the staple tile adjustment is performed.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press any key to return again to "36 mode menu
screen". Only through this operation, [10. FNS
adj.] is made effective.
Press the [10. FNS adj.] key.
3. On the "FNS adj. menu screen",
select [1. Fold&Stitch posit adj.].
4. On the "Fold & Stitch posit adj. screen",
select the paper size you want to adjust by
using the arrow keys.
5. Set five A4 originals in the ADF.
6. Press the [Copy screen] key to output a
fold&stitch sample.
7. Fold the output sample along its crease.
8. Check the distance between the fold and staple
positions.
• Standard A, B: 0 ± 1.5mm
3
∗
button.
plate position adjustment
7145 series Field Service Ver.4.0 Mar. 2004
9. If it is not within the standard, press # button
∗
while pressing
10. On the "Fold & Stitch position adj. screen",
enter a numeric value using the numeric key-
pad. Then, press [SET] key.
• Setting range: -10 ~ +10
1 step = 0.5mm
• In case of A: set a plus value
• In case of B: set a minus value
11. Repeat the steps 4 through 9 until the
fold&stitch position comes within the standard
range.
12. Press [RETURN] and go back to the "FNS adj.
menu screen".
1-72
A
Fold
Exit direction
4511D528AA
B
Fold
Exit direction
4511D527AA
button.