Letter Fold-In Position Adjustment - Konica Minolta BizHub Pro 1050 User Manual

02 Letter Fold-in Position Adjustment

Perform this adjustment for the folding positions in Letter Fold-in mode processed by
the FD-501 Folding Unit.
• When adjusting both Single Fold and Double Fold, be sure to start with the
Double Fold adjustment.
• The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 5 will be altered by changing the position of
either Single Fold or Double Fold.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 03 Multi Folder (Fold) Adj.
2 Touch 02 Letter Fold-in Position Adjustment to display the Letter Fold-in
Position Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Letter Fold-in,
then press [Start]. A sample pattern (No. 16) will be output.
2-28
03 Multi Folder (Fold) Adjustment (continued)