Paper Width Adjustment - Konica Minolta BizHub Pro 1050 User Manual

02 Paper Width Adjustment

Perform this adjustment if stapled sheets are not aligned neatly processed by the
FS-503 Staple Finisher.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 01 Stapler Position Adj.
2 Touch 02 Paper Width Adjustment to display the Paper Width Adjustment
Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, touch Staple and then
press [Start]. A sample pattern (No. 16) will be output.
5 Check misalignment (a), in which misalignment occurs if the paper width setting
is larger than the actual width, or paper curving (b), in which a sample set is
curved if the paper width setting is smaller than the actual width has occurred.
a
01 Stapler Position Adjustment (continued)
b
2-21