Reset Function Setting - Konica Minolta BizHub Pro 1050 User Manual

02 Reset Function Setting

When the machine is reset, select the copying conditions from the factory default
setting (Full Auto), Initial Set which is set at "03 Copy Setting - 01 Reset Setting - 01
Initial Setting", or the copying condition which is preset to Mode Memory 30. In
addition, alter Output Application of Full Auto as desired.
Procedure
1 Touch 03 Copy Setting - 01 Reset Setting.
2 Touch 02 Reset Function Setting.
3 Select the copying conditions when resetting the machine.
AUTO RESET Key Setting: Touch Full Auto to set to the factory default setting
(Full Auto).
Touch Initial Setting to set as "03 Copy Setting - 01 Reset Setting - 01 Initial
Setting".
Each Reset Setting: Touch Mode Memory(30) to set to the copying conditions
preset to Mode Memory 30.
In order to specify the setting selected in 01 Initial Setting of 03 Copy Setting as
the copying conditions when reset, select Initialize Set.
Note:
When Initial Setting is selected for AUTO RESET Key Setting, Each Reset
Setting becomes enabled.
4 Select Output Application for Full Auto.
Touch any key on the right side of Finisher Mode for Full Auto.
5 Touch OK to complete the setting and return to the Reset Setting Menu Screen.
6 Touch Return to restore the Utility Menu Screen.
01 Reset Setting (continued)
4-21