Konica Minolta BizHub Pro 1050 User Manual page 19

Paper Type Specifications
The following six paper types are provided according to the plainness of paper.
Coated A, Coated B, Fine, Normal, Book/News, Embossed
The special paper types that are not included in the above six types are set
separately.
Blank Insert, OHP, User
The following describes the specifications of each paper type.
Coated A
The coated paper is an art paper or coated paper, applied approximately 20 to 40g of
2
coating per 1 m to on top of both side of fine paper. The coated paper is mostly
used for luxury art books, calendars, car brochures, books, magazines, leaflets, and
posters. Always specify [Coated A] to a tray to which the coated paper is loaded.
Coated B
Specify [Coated B] when overlay printing on the offset printed coated paper. If a
trouble occurs in feeding the coated paper when [Coated A] is specified, select
[Coated B].
When using the overlay printed paper, you are required to specify specific
settings besides [Coated B] to the tray to which this type of coated paper is
load. Contact your sales representative.
Fine
The Fine paper is a non-coated paper generally used for offset printing. The fine
paper has a high degree of whiteness and used for various purposes. Specify [Fine]
to a tray to which the fine paper is loaded.
Normal
The Normal paper is used for copying in general and is called "PPC paper." The
normal paper is usually not a recycled paper. Specify [Normal] to the tray to which
the normal paper or the recycled paper for copying is loaded.
Book/News
The Book/News paper is used for a body part of a book. It is a highly opaque paper
to prevent prints to be seen from the back, or a cream-colored paper for ease of
reading. Specify [Book/News] to a tray to which this type of paper is loaded.
Embossed
The Embossed paper has a non-smooth surface on which a toner is hard to be fixed.
Specify [Embossed] to a tray to which this type of paper is loaded.
Blank Insert
Blank Insert is not a category of the paper type. This is only fed without being
printed. When the Cover With Blank Sheet, Blank Insert, or OHP interleave blank
function is used, specify [Blank Insert] to a tray to which a paper already printed and
not copied by this machine is loaded, or a blank paper only to be fed is loaded.
User
When a paper type other than that of which can be specified on this machine is used,
use this function. For the details, contact your service representative.
OHP
Specify [OHP] to a tray to which transparent films are loaded.
Paper Setting Outlines (continued)
1-3