Timer Setting - Konica Minolta BizHub Pro 1050 User Manual

02 Timer Setting

Use this function to set the On/Off times in hours and minutes for each day of the
week or set the collective time for the entire week, i.e., the same On/Off time for a
certain day of the week.
Procedure
1 Touch 01 System Setting - 03 Weekly Timer Setting - 02 Timer Setting.
2 When the Timer Setting Screen is displayed, the On-time of Monday is always
highlighted.
Enter a two-digit On-hour (ex. 8 a.m. is 08) and a two-digit On-minute (ex. 7 min.
is 07) using the touch panel keypad, and then touch Set.
3 Touching Set repeatedly will shift the input section from Monday On, Monday Off,
Tuesday On, Tuesday Off.
Notes:
• If On-time and Off-time are the same, the power will not be turned on.
• If the setting is 00:00~00:00, you will not be able to set the machine off/on
condition for specific days.
• When setting Sunday Off-time, Monday On-time is highlighted again.
4 To set the On/Off time collectively for more than one day of the week, touch Block
Set to display the Weekly Timer On/Off Time Collective Setting Screen.
5-8
03 Weekly Timer Setting (continued)