Konica Minolta BizHub Pro 1050 User Manual page 69

5 Check a distance (a) and distance (b) on the output sheet.
6 If the desired result cannot be obtained, touch the ADJUSTMENT tab.
7 Touch Next or Back to select the paper size to be adjusted.
Touching Next continuously will change the paper size as follows:
All - 11x17 - A3 - B4 - 8.5x14 - A4R - 8.5x11R - 8K - 12x18
8 Touch Single Fold.
9 Use the touch panel keypad to enter the desired adjustment value, then touch
Set.
Available range: -50 to +50, 1 step = 0.1 mm
Note:
The distance (a) in step 5 will increase when the "+" value is entered, and
decrease when the "-" value is entered.
10 Touch Double Fold. Repeat step 9.
Note:
The distance (b) in step 5 will increase when the "+" value is entered, and
decrease when the "-" value is entered.
11 Repeat steps 3 to 10 until the desired result is obtained.
12 If adjustment in any other size is required, repeat steps from 3 to 11.
13 Touch Return to restore the Multi Folder (Fold) Adjustment Mode Menu Screen.
03 Multi Folder (Fold) Adjustment (continued)
b
[2]
a
[1]
Paper feed direction
2-35