Konica Minolta BizHub Pro 1050 User Manual page 175

(12) TCP/IP Filter permission settings
To specify to use the permission settings or not, select On or Off to the right
of Permission Setting. To specify the range of permitted connections, touch
an appropriate setting range key to display an address input screen. After
entering in the field, touch OK.
(13) TCP/IP Filter denial settings
To specify to use the denial settings or not, select On or Off to the right of
Denial Setting. To specify the range of denied connections, touch an
appropriate setting range key to display an address input screen. After
entering in the field, touch OK.
(14) Network Test Ping Address
To enter an address, touch Network Test Ping Address to display an
address input screen. After entering in the field, touch OK. Touch Send to
perform the network test. Any event of error prompts Error in the message
box.
3 Touch OK to complete the settings and return to the Controller NIC Setting Menu
Screen.
4 Touch Return to specify other settings, or touch Exit to finish setting.
5 After you have changed the settings, turn off the auxiliary power, then turn off and
on the main power.
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval in
between, the machine may not run correctly.
02 Controller NIC Setting (continued)
5-47