Konica Minolta BizHub Pro 1050 User Manual page 95

Specific setting and Description
03 Density Setting
01 Density Shift for Enhance Mode
Select the default density setting for each Enhance
Mode.
02 User Density Setting
Preset the density level which is frequently used.
03 Photo Mode Density Setting
Select the density level set in EE (Auto Density
Setting) when the Photo Mode is selected.
04 Image Density Selection
Set the image density lighter or set the maximum
dark level darker, without degrading the image
quality.
04 Preset Zoom
Preset the magnification ratio which is frequently
used.
03 Copy Setting
01 Reset Setting
01 Initial Setting
Set the initial setting when the machine is reset.
02 Reset Function Setting
01 AUTO RESET Key Setting
Set the on-screen indication which is displayed when
pressing [Reset].
The factory default setting is Full Auto, and the initial
setting is the settings defined in "01Initial Setting".
02 Each Reset Setting
This setting is enabled when Initial Setting is selected
in "01 AUTO RESET Key Setting". Set the copying
conditions preset to either Mode Memory 30 or Copy
Initial Setting.
03 Finisher Mode for Full Auto
Select the FNS mode when Full Auto is selected as
pressing [Reset].
03 Initial by Key Counter Insert
Select to reset the copying conditions to the initial
setting when inserting the key counter and the
copy card.
Utility Screen Setting Outlines (continued)
Setting options (underlined: default)
0 - 5 (Text & Photo:2, Low
Contrast:3, Photo:2, Text:2)
Two levels
Lighter/Normal/Darker
+1 - -5 (7 levels)
Three types
Copy Initial Setting (Original
Setting/Special Image/Zoom/
Output Application/Copy Mode/
Paper Presetting/Rotation/ADF)
Full Auto/Initial Setting
Initialize Set/Mode Memory(30)
Uncollated/Collated/Staple & Collate/
Fold & Staple/Folding/Face UP/Face
Down
On/Off
U-3