Each Function Setting - Konica Minolta BizHub Pro 1050 User Manual

02 Each Function Setting

The following features can be provided by switching the setting.
• Auto select of Booklet copy
Set the machine with SD-501 mounted to automatically select the Booklet mode
when Stapling & Folding or Folding mode is selected. This function is not
supported in this version.
• Original Glass AMS
The machine detects the size of the original and selects the appropriate
magnification ratio to correspond to the selected paper size.
• ADF AMS
After detecting the original size placed in the ADF, the copier automatically selects
an appropriate ratio for the copy when copy size is selected manually.
• Original Glass APS
The machine automatically selects the same size of copy paper as the original
placed on the original glass.
• ADF APS
The machine automatically selects the same size of copy paper as the original
placed in the ADF.
• Select tray when APS cancel
Select the tray to be automatically selected when APS is released.
• Orig./Out Bind Direction Set
Set the machine to conform to the binding direction of the originals and printed
sets each other.
• Stapling Auto Reset
Staple mode is automatically canceled after a job is completed with Staple sort
mode On.
• Original Binding Direction
Select to reset or save the original direction setting made on the Special Original
Screen and the binding position setting made on the Output Mode Screen after
completion of each copying job.
• Status Hold When Auto Reset
When Reset functions, select to reset the Platen/ADF mode to the initial setting, or
save the previous setting.
4-23