Network Setting Clear - Konica Minolta BizHub Pro 1050 User Manual

14 Network Setting Clear

Recover the initial network settings specified at the time of shipment.
Procedure
1 Touch 04 Network Setting - 02 Controller NIC Setting - 14 Network Setting
Clear.
2 Touch Initialize Execute to recover the initial setting specified at the time of
shipment.
3 Touch OK to complete the settings and return to the Controller NIC Setting Menu
Screen.
4 Touch Return to specify other settings, or touch Exit to finish setting.
5 After you have changed the settings, turn off the auxiliary power, then turn off and
on the main power.
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval in
between, the machine may not run correctly.
02 Controller NIC Setting (continued)
5-69