Konica Minolta BizHub Pro 1050 User Manual page 252

1. Click [Setting].
The SSL/TLS Setting screen appears.
Notes:
• Initially [Request a Certificate] is checked.
• Remove an already installed certificate first before requesting a new one.
See p. 6-33 for how to remove it.
2. Click [Next].
3. Enter necessary information, and click [Next].
Following the screen indicating that the certificate is being requested, another
screen appears indicating the request has been completed.
4. Click [OK].
The Certificate Signing Request Data screen appears.
5. Click [Save].
The file will be saved.
6. Click [OK].
It will take you back to the SSL/TLS Information screen.
7. Check [Install a Certificate], and click [Next].
The certificate installation screen appears.
8. Enter the data of the certificate that you requested.
9. Click [Next].
10. The Encryption Strength Setting and the Mode using SSL/TLS screen
appears.
11. Enter discretionary settings, and click [Create].
Creation results appear.
12. Click [OK].
It will take you back to the SSL/TLS Information screen.
6-30
Administrator Mode (continued)