Konica Minolta BizHub Pro 1050 User Manual page 78

10 Output
Order
11 Page Order
12 Print
Number
13 Collate
14 Paper Size
15 Orientation
16 Banner
Option
17 Banner Tray
18 Convert
Paper Size
19 Combination Specify the desired
20 Booklet
21 Adhesive
Binding
22 Print
Position
02 PCL Setting
01 Font Source
02 Font Number Specify the area of available
3-4
Select to exit face up or face
down in initial state.
Select the print page order in
initial state.
Specify the print quantity in
initial state.
Select to use the Sort mode. Collated, Uncollated
Select the paper size to be
initially used.
When specifing tabs, select
the number of tabs as well.
Select the orientation of the
image printed on copy paper.
Select to print the banner
page.
Select the paper feed tray for
printing banner page.
The selectable items vary
depending uponn the
configuration of installed
options.
Select to change the paper
size.
combination function.
Select to use the Booklet
function.
Select to use the Adhesive
binding mode.
Select the initial print
position.
Select the medium of font
source.
Internal: Standard font
Disk: Downloaded font
Soft: Software font
font number according to the
font source.
Function Overview (continued)
Face Down, Face Up
1 to N, N to 1
1 to 9999
12x18, 11x17, 8.5x14, 8.5x11,
5.5x8.5, A3, B4, A4, B5, A5,
F4, 12x18W, 11x17W,
8.5x11W, 5.5x8.5W, A3W,
B4W, A4W, B5W, A5W, 8K,
16K, 8.5x11Tab, A4Tab
Portrait, Landscape
OFF, ON
Auto, Tray 1, Tray 2, Tray 3, Tray
4, Tray 5
OFF, 8.5x11/11x17 to A4/A3,
A4/A3 to 8.5x11/11x17
OFF, 2 in 1, 2 repeat, 2 repeat-
reversal(L), 2 repeat-reversal(R),
2 repeat-reversal(U), 2 repeat-
reversal(D)
OFF, ON
OFF, ON
Left, Middle, Right / Rear Edge,
Center, Lead Edge
Internal, Disk, Soft
0 to 999