Tri-Fold Position Adjustment - Konica Minolta bizhub C451 User Manual

Utility mode
Note
Set the value by mm.
Refer to the conversion rate below.
1 inch = 25.4 mm

Tri-Fold Position Adjustment

The folding position when printing with the "Tri-Fold" setting can be adjusted
for each paper size.
Note
[Tri-Fold Position Adjustment] appears only if optional finisher FS-608 is
installed.
0 Before making any adjustments, use the "Tri-Fold" setting to print a
single sample copy. Perform the adjustment while checking the sample
that was created.
1
Display the Administrator Settings screen.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
C451
11
11-78