10.3.13 [Print Position] Tab - Konica Minolta bizhub press C7000 User Manual

10.3 Parameter details

10.3.13 [Print Position] tab

Function Name
[Image Shift]
[Print Position
Setting]
[Crop Mark]
[Setting for Impo-
sition]
[Only on Front
Side]
[Corner Crop
Mark Type]
[Trim Margin]
[Horizontal Shift]
[Vertical Shift]
bizhub PRESS C7000/C7000P/C6000/C70hc
Option
[Off], [Shift Front/Back
Evenly], [Shift
Front/Back Separately]
[Left], [Center], [Right]
[Off], [Corner], [Center],
[Corner/Center]
[Per Page], [Per Sheet]
Off, On
[Type 1], [Type 2], [Type
3]
0 to 20.0 mm
-20.0 to 20.0 mm
-20.0 to 20.0 mm
Description
Set [Right] and [Bottom] to shift a position of a print im-
age.
Set [Right] to shift the output image horizontally. (Posi-
tive value: shift to the right, negative value: shift to the
left)
Set [Bottom] to shift the output image perpendicularly.
(Positive value: shift to the bottom, negative value: shift
to the top)
Set a print position if the output size is larger than the
original size.
Set this to print a crop on paper.
Specify whether to print a crop for imposition per page
or per sheet.
The crop mark is printed only on the front surface if [2-
Sided] is selected.
Specify a type of a corner crop.
[Type 1]:
[Type 2]:
[Type 3]:
A position can be shifted while displaying a preview.
A position can be shifted while displaying a preview.
A position can be shifted while displaying a preview.
10
10-20