Snmp Setting Function; Changing The Auth-Password And Priv-Password; From The Control Panel - Konica Minolta nizhub c250p User Manual

2
2.9

SNMP Setting Function

When access to the Admin. Setting mode by the Administrator of the ma-
chine is authenticated, the machine enables changing of the SNMP v3 Write
User Password (auth-password, priv-password) required for accessing the
MIB object over the network using the SNMP from the PC.
Each of the auth-password and priv-password can consist of 8 to 32 digits.
The password entered for the authentication purpose appears as "*" or "●"
on the display.
2.9.1

Changing the auth-password and priv-password

Note
Do not leave the machine with the Admin. Setting mode setting screen
left shown on the display. If it is absolutely necessary to leave the ma-
chine, be sure first to log off from the Admin. Setting mode.
<From the Control Panel>
0 For the procedure to access the Admin. Setting mode, see "Accessing
the Admin. Setting mode" on page 2-2.
1
Access the "Admin. Setting" mode from the control panel.
2
"Network Setting" appears.
3
Press the [
2-52
)
] key.
Administrator Operations
C250P