Machine Structure And Features - Brother 882-T51 Operation Manual

Machine Structure and Features

■ Three-dimensional materials can be
embroidered
Since the embroidering surface is a cylindrical arm,
three-dimensional or tubular materials such as bags
and T-shirts can easily be positioned in order to sew
beautiful embroidery.
1 Cylindrical arm
■ Embroider while replacing the
thread spool a minimal number of
times
Before starting to embroider, touch the thread color
sorting key ( ) to rearrange the embroidery order
and sort it by thread colors. For example, when
embroidering after simply arranging the same
pattern to be repeated side-by-side, you will need to
replace the thread spool multiple times with each
pattern. However, by using the thread color sorting
function, the thread color order will be rearranged
to embroider the same color at one time, allowing
you to embroider while replacing the thread spool a
minimal number of times.
The thread color sorting function cannot be used
with overlapping patterns.
■ Insert line feeds in character
patterns
While entering character embroidery patterns, touch
the line feed key ( ) to arrange the following
characters on the next line.
You can check the entered characters easily by
touching .
■ Four thread spools can be prepared
for embroidering
Up to four thread spools can be prepared on a spool
stand for the next color change. By hooking the
thread on the thread cutter/holder, the thread can be
smoothly replaced with that of the next color.
1 Thread cutter holders
2 Spool stand
7