Moving A Pattern; Flipping A Pattern Horizontally - Brother 882-T51 Operation Manual

Moving a pattern

Determine where in the embroidery frame the
pattern will be embroidered. If multiple patterns
are combined, move each pattern to lay out the
pattern.
a Touch the key for the direction where you
wish to move the pattern.
→ The pattern moves in the direction of the arrow on
the key.
1 Shows the vertical distance moved from center.
2 Shows the horizontal distance moved from center.
• To return the pattern to its position before it was
moved (center of the embroidery frame), touch
The pattern can also be moved by dragging it.
The pattern can also be dragged by selecting it directly
in the screen with your finger or the touch pen.
Note
• The pattern can only be moved when the
arrow keys are on the screen.
Memo
• The arrow keys in the embroidering screen

Flipping a pattern horizontally

a Touch
→ The pattern is flipped horizontally.
• Each touch of the key turns the setting either on or off.
1
2
Horizontal flip
turned off
.
SELECTING/EDITING/SAVING PATTERNS
are used to move the frame to select the
embroidering position.
so that it changes to
Flipped horizontally
.
5
121