Stopping Embroidering; Continuing Embroidering; Temporarily Pausing; Resume Embroidering After The Machine Was Turned Off - Brother 882-T51 Operation Manual

■ Continuing embroidering

To select a new pattern, touch
→ The pattern type selection screen appears.
Note
• The embroidering speed can be changed,
even while the pattern is being
embroidered. (Refer to "Maximum
Embroidering Speed Setting" on page 99.)

Stopping embroidering

The machine can be stopped during embroidering.

■ Temporarily pausing

a Press the "Start/Stop" button.
→ The machine stops and the "Start/Stop" button lights
up in red.
• The thread is not trimmed.
• To continue embroidering, after checking that the
upper thread is taut, touch the unlock key, and then
press the "Start/Stop" button.
■ Resume embroidering after the
machine was turned off
.
a Press the "Start/Stop" button.
→ The embroidery machine stops and the "Start/Stop"
button lights up in red.
• The thread is not trimmed.
b Touch
embroidery machine.
Press the thread trimming button.
c
→ The bobbin and upper threads are trimmed.
• Before turning off the embroidery machine, be sure to
trim the threads.
EMBROIDERING TUTORIAL
to unlock the
2
55