Thread Trimming Adjustment; Using The Automatic Thread Cutting Function (End Color Trim); Using The Thread Trimming Function (Jump Stitch Trim) - Brother 882-T51 Operation Manual

Thread Trimming Adjustment

Using the automatic thread
cutting function (End Color Trim)
The automatic thread cutting function
the thread at the end of embroidering each color.
This function is initially turned on. To turn this
function off, touch and then
function can be turned on or off during
embroidering.
• This setting returns to its default
machine is turned off.
a Touch .
b Touch to turn off the automatic thread
cutting function.
→ The key will display as
→ When one color thread is embroidered, the machine
will stop without cutting the thread.
will cut
The thread trimming function
automatically trim any excess thread jumps within
the color. This function is initially turned on. To
. This
turn this function off, touch
This function can be turned on or off during
embroidering.
when the
a
.
EMBROIDERING SETTINGS
Using the thread trimming
function (Jump Stitch Trim)
• Your customized setting remains after turning the
machine off and on.
1 Jump stitch
Note
• When this function is turned on, use the
included ball point needle 75/11 for
embroidering patterns with short jump
stitches such as alphabet characters. Using
other needles may cause the thread to
break.
Touch .
will
and then .
4
101