Brother 882-T51 Operation Manual page 181

The selected pattern is going to be
deleted because was touched.
A saved combined pattern is being
rotated in the embroidering settings
screen.
This message appears when the
embroidery character pattern is resized
so that it is too large for the embroidery
frame.
The machine was turned off while
sewing, then turned on again.
Touch to return the machine to
the condition (pattern position and
number of stitches) when it was turned
off. Follow the procedure described in
"Resume Embroidering After Turning
Off the Machine" on page 89 to align
the needle position and sew the
remainder of the pattern.
This message is displayed when the
character pattern combination is too
large to fit in the embroidery frame.
The thread picker did not operate
correctly.
Remove the thread entangled on the
thread picker.
APPENDIX
was touched while thread colors
were being changed.
This message is displayed when the
character pattern combination is too
large to fit in the embroidery frame.
Change the character pattern size or
layout the patterns to fit the embroidery
frame.
The thread trimming button was pressed
before the machine was unlocked.
Touch to use the
thread trimming function.
7
179